Everpure EV910853 | CG53-10 Replacement Cartridge for CGS-10 Systems | 12-Pack
Everpure EV910853 | CG53-10 Replacement Cartridge for CGS-10 Systems | 12-Pack is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Everpure EV910853 | CG53-10 Replacement Cartridge for CGS-10 System...
The Everpure EV910853 (CG53-10) is a submicron carbon block replacement cartridge designed to reduce chlorine taste, odor, and particles as small as 0.5 micron, making it ideal for foodservice equipment requiring reliable drinking water filtration.
Key Specifications:
| Compatibility | Fits most 10" filter bowls |
| Capacity | 10,000 gallons (37,800 L) |
| Contaminants Filtered | Chlorine taste, odor, dirt, fine particles |
| Operating Conditions | 30-125 PSI; 40-100°F |
| Number of Filters | 12-Pack |
Why Choose the Everpure EV910853 (CG53-10)?
- Superior Taste & Odor Reduction: Removes chlorine taste and odor for cleaner, fresher-tasting drinking water.
- High Porosity Design: Prevents premature plugging, ensuring consistent flow and extended service life.
- Reduced Maintenance Costs: Helps keep foodservice equipment running at peak efficiency with fewer breakdowns.
- Easy Installation: Drop-in design simplifies replacement without need for specialized tools.
How to Replace Everpure EV910853 (CG53-10):
- Turn off the water supply to the filter housing.
- Unscrew the bowl by hand without using a housing wrench.
- Remove the old cartridge and inspect the o-ring, lubricating or replacing as needed.
- Install the new cartridge vertically so the bowl hangs down.
- Screw the bowl back on by hand and flush the system before use.
Notice: For detailed, step-by-step guidance, please refer to the guide here.
FAQ
Q: How Often Should the Everpure EV910853 (CG53-10) Filter Be Replaced?
A: Replace the cartridge every 10,000 gallons or approximately every six months, whichever comes first, as part of a regular preventative maintenance schedule.
Q: How Can I Maximize the Pentair EV910853 Lifespan?
A: Follow recommended operating conditions, log every replacement date, and avoid running unsafe or unknown-quality water through the system without adequate disinfection before or after the cartridge.
Q: What Contaminants Does Pentair EV910853 (CG53-10) Filter Remove?
A: This cartridge reduces chlorine taste and odor while mechanically filtering dirt and particles down to 0.5 micron in size.
Q: What Certifications Does This Filter Have?
A: The CG53-10 is tested and certified by NSF International against NSF/ANSI 42 & 53 standards in model CGS-10.
Q: Is This a Genuine Filter? Is BottleFillingStations.com an Authorized Brand Distributor?
A: Yes, this is a genuine Everpure EV910853 (CG53-10) filter so it will perform per manufacturer's standards and come included with a warranty. BottleFillingStations.com is an authorized Everpure distributor.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Everpure EV910853 (CG53-10, 12 Pack) is a 9.75" drop-in carbon block replacement cartridge for Everpure Costguard and most 10" filter housings. Its 0.5-micron rating reduces fine particles, dirt, cysts, and chlorine taste and odor.
Step-by-Step Replacement Guide
- Shut off the water supply to the housing and relieve pressure by opening a nearby faucet or the housing's pressure-relief button until flow stops. Place a bucket under the housing to catch residual water.
- Unscrew the sump (bowl) from the filter head by hand, turning it counter-clockwise, then remove the old CG53-10 cartridge from inside the sump.
- Inspect the O-ring on the sump for wear or debris, and clean, lubricate, or replace it as needed to ensure a proper seal.
- Drop the new CG53-10 cartridge into the sump, then thread the sump back onto the filter head by hand until snug. Do not use a housing wrench.
- Turn the water supply back on slowly and check the sump and fittings closely for leaks.
- Flush the cartridge at full flow for 3 minutes to purge air and loose carbon fines before returning the system to service.
Looking for a genuine Everpure EV910853 CG53-10 cartridge? Shop here.
