Get in touch

Leave a message

Use this form to get in touch with us.  We'll get back to you as soon as we can.  Or you can reach us by:

  Phone: (855) 558-9600

You can order in any of the following ways:

1. Through this website
2. By calling us at 1 (855) 558-9600
3. Emailing a purchase order to Note that we accept purchase orders on a case by case basis. Contact us with the model #, quantity, shipping destination and expected order date to receive approval.

We accept the following forms of payment:

1. Credit Card
2. Direct Debit
3. Check / Purchase Order. NOTE: Your company must be approved before we officially process your order. Contact us here or at (855) 558-9600 to receive approval. Upon successful delivery, please send payment to ATTN: Mission Water Company LLC, PO Box 6872, Kokomo, IN 46902

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we cannot offer you a refund or exchange.  To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. If you would like to return your unused item, we refund you less a 25% restocking fee and original shipping fees (if applicable).

To complete your return, we require a receipt or proof of purchase.  Please do not send your purchase back to the manufacturer.

Please note there are NO RETURNS for outdoor models.

3-7 business days in the U.S (exceptions may apply).  Expedited shipping options are available.  For a more accurate estimate, please contact us with the desired model #, quantity, shipping zip code and expected order date. 

 Yes. Request custom rates by contacting us with the desired model #, order quantity, shipping address and expected order date.

Yes, learn more about getting a custom quote for high-volume orders here.


Yes, the following warranties apply: Refrigeration System Elkay and Halsey Taylor refrigeration systems include a 5 year limited warranty. Electrical Parts & Water System The Elkay and Halsey Taylor warranty for electrical parts and water system is valid 18 months from the factory shipment or 12 months from the date of installation.  The warranty will honor which ever date falls first. View more warranty details here

Request warranty here.

Yes, we will provide lifetime troubleshoot advisory to help diagnose and solve your problem. Please note that certain problems may require additional service. 


Installation instructions vary by model.  Each unit shipped contains installation instructions.  Also, includes installation instructions for each model on the product pages. 

Yes we do! Our nation-wide installation network will assure your new drinking fountain is being installed the right way the first time.  Contact us for a custom quote:

We advise that NON-CHILLED fountains less than 10 years old are suitable for a retrofit. We advise that CHILLED fountains less than 5 years are suitable for a retrofit. Not sure how old your model is?  We can find out for you. Contact us with your existing fountain’s serial #, which you can find at the bottom of your fountain. 

All bottle filling stations are designed for ADA compliancy; however, we advice you to check the spec sheet to verify compliance. The spec sheet can be found on the product page at 

It varies, but the typical Bottle Filling Station retrofit install takes 2-3 hours. 


It is recommended to routinely clean your Bottle Filling Station with a soft cloth and mild dishwashing soap to spray and wipe down the unit.  See video here (jump to 0:48 min) It is also recommended to clean the flexible fill mat.  Remove the four screws to wipe beneath and on top of the mat.  See VIDEO here (jump to 2:35 min) 

When filter status light turns to red, the filter needs to be changed.  Follow these steps:

1) Remove the bottom access panel.
2) Unplug unit
3) Unscrew old filter
4) Install new WaterSentry Plus filter.
5) Rest Filter light.  See below.

See VIDEO here (jump to 1:07 min) 

Filter Facts

The WaterSentry Plus filters used in the Elkay and Halsey Taylor bottle filling stations reduces Aesthetic Chlorine, Taste and Odor, Particulate Class I, and Lead. 

The WaterSentry Plus filters used in the Elkay and Halsey Taylor bottle filling stations have a 3,000 Gallon capacity, or about 20,000 20 oz. bottle fills.

Changing a filter is fairly easy.  Simply twist the used filter with a one fourth turn and replace with the new filter cartridge.  Filter replacements are available in single or bulk order (View Store). 

Reset filter light back to green by removing top cover and pressing the black reset button.  Select reset filter.  The light should appear as green.  Detailed instructions on filter light reset are included in produce package.

See VIDEO here (jump to 1:55 min) 


We recommend checking out our partner site’s resource: The Ultimate Guide: Fundraising for Water Bottle Filling Stations in Schools