Elkay EDF15R | Bracket Drinking Fountain | Filterless, Non-refrigerated, Stainless Steel
Elkay EDF15R | Bracket Drinking Fountain | Filterless, Non-refrigerated, Stainless Steel is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Elkay EDF15R | Bracket Drinking Fountain | Filterless, Non-refriger...
The Elkay EDF15R is a non‑filtered, non‑refrigerated stainless steel bracket fountain designed for wall‑mount installation. With mechanical top push‑button activation, it provides dependable hydration for single‑station use in both indoor and outdoor environments.
Key Specifications:
- Design: Wall‑mount bracket fountain with mechanical activation
- Finish: Stainless Steel
- Filtration: Non‑filtered
- Refrigeration: Non‑refrigerated
- Stations Served: 1
Features & Benefits:
- Indoor + Outdoor Use: Suitable for a variety of environments when properly winterized or protected in extreme climates
- Durable Construction: Stainless steel finish resists corrosion and wear
- Compact Design: Small footprint ideal for tight installation spaces
- Reliable Hydration: Mechanical push‑button activation ensures water flow without electricity
- Certified Compliance: Meets ASME A112.19.3/CSA B45.4 and NSF/ANSI 61 & 372 standards
What's Included:
- EDF15R Bracket Fountain
- Push‑button bubbler assembly
- Installation instructions (PDF)
- Warranty documentation
FAQ
Q: What Is the Recommended Water Pressure for the EDF15R?
A: The fountain is rated for inlet water pressure of 20–90 psi. If supply pressure exceeds 90 psi, a pressure reducing regulator should be used.
Q: How Is the Bubbler Stream Height Adjusted?
A: The stream regulator is factory set at 45–50 psi. To adjust, remove the retaining nut and button from the bubbler assembly and turn the screw on the regulator. Clockwise raises the stream height, counterclockwise lowers it. A stream height of approximately 1" (25 mm) is recommended.
Q: What Maintenance Is Required?
A: Mineral deposits in the orifice can be removed using a round file or small diameter wire. Care must be taken not to damage the orifice assembly.
Q: Where Can the EDF15R Be Installed?
A: It is designed for wall‑mount installation on smooth, flat, finished wall surfaces with adequate support. Suitable for indoor and outdoor use when properly winterized or protected in extreme climates.
Q: What Is the Station Capacity?
A: The EDF15R serves one station.
Q: Can the Bubbler Be Replaced?
A: Yes. The bubbler assembly can be replaced with the Elkay LK142 Pushbutton Bubbler for continued reliable operation.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us now
- Mount the Elkay EDF15R fountain on a smooth, flat, finished wall surface with adequate support structure.
- Establish the rim height at which the fountain is to be mounted, following ADA or local requirements if applicable.
- Refer to the rough‑in diagram for plumbing layout and dimensions.
- Locate and install the trap (not included) beneath the fountain.
- Install a shut‑off valve (not included) on the building water supply line.
- Secure the fountain to the wall using 1/4" (6 mm) lag screws or bolts (not included).
- Connect the fountain to the building supply line by running a water line between the shut‑off valve and the fountain inlet.
- Turn on the water supply and check all connections for leaks.
- Adjust the bubbler stream height using the regulator screw; recommended stream height is approximately 1" (25 mm).
- For detailed steps, refer to the Elkay EDF15R installation manual or contact a licensed plumber.
- Inspect the bubbler orifice periodically for mineral deposits; clean using a round file or small diameter wire.
- Adjust the stream regulator if supply pressure varies; clockwise raises stream height, counterclockwise lowers it.
- Recommended stream height is 1" (25 mm) at 45–50 psi supply pressure.
- Check all water connections regularly for leaks and reseal if necessary.
- Clean exterior surfaces with mild soap and water; avoid abrasive cleaners that may damage the finish.
- Disconnect water supply before servicing internal components to avoid hazards.
- For service or repairs, consult the manual or a certified Elkay service representative.
