Wilkins 12-600XLHR | Water Pressure Reducing Valve with Strainer
Wilkins 12-600XLHR | Water Pressure Reducing Valve with Strainer is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins 12-600XLHR | Water Pressure Reducing Valve with Strainer
The Wilkins 12-600XLHR is a water pressure reducing valve with integral by-pass check valve and strainer, designed for residential and commercial potable water systems requiring reliable pressure control and thermal expansion protection.
Key Specifications:
- Size: 1/2 Inches
- Pressure Range (HR Option): 75 to 125 psi
- Maximum Working Pressure: 300 psi
- Maximum Working Temperature: 140°F
- Notable Certifications: ASSE 1003, IAPMO, CSA, NSF 61
Other Related Variants:
- 112-600XLHR: 1 1/2 Inches version
- 114-600XLHR: 1 1/4 Inches version
- 1-600XLHR: 1 Inch version
- 2-600XLHR: 2 Inches version
- 34-600XLHR: 3/4 Inches version
Materials:
- Main Valve Body & Access Covers: Low Lead Cast Bronze ASTM B 584 and Low Lead Brass
- Fasteners: Stainless Steel, 300 Series
- Stem & Plunger: Low Lead Cast Bronze ASTM B 584 and Low Lead Brass
- Elastomers: Buna Nitrile (FDA Approved) and EPDM (FDA Approved)
- Cap Gaskets: Natural Vulcanized Fibre and Acetal (Delrin™)
- Strainer Screen: Stainless Steel, 300 Series
- Seat: Stainless Steel, 300 Series
Typical Installation:
Local codes shall govern installation requirements. The Model 600XL may be installed in any position. If installed in a pit, vault or inside application, specify the "SC" sealed cage option. Multiple installations are recommended for wide demand variations or where the desired pressure reduction is more than 4 to 1 (i.e.: 200 psi inlet reduced to 50 psi outlet). A pressure gauge must be used downstream to verify correct pressure setting. Provide adequate side clearance for maintenance access.
Standards Compliance:
ASSE Listed 1003; IAPMO Listed; CSA Certified; City of Los Angeles Approved; NSF/ANSI/CAN 61
Features & Benefits:
- HR Spring Range: Factory set at 85 psi with 75 to 125 psi range, ideal for high-pressure applications.
- Integral By-pass Check Valve: Prevents buildup of excessive system pressure caused by thermal expansion.
- Balanced Piston Design: Provides smooth and responsive pressure regulation in both flow and no-flow conditions.
- Integral Strainer: Built-in 20 mesh stainless steel strainer protects valve from sediment and debris for extended service life.
FAQ
Q: Can the Zurn 12-600XLHR be installed in any position?
A: Yes, the Wilkins 12-600XLHR can be installed in any position. For pit or vault installations, specify the "SC" sealed cage option.
Q: What is the pressure reduction ratio recommended for this valve?
A: The Zurn 12-600XLHR is recommended for pressure reductions not exceeding a 4:1 ratio. For higher ratios, multiple installations are recommended.
Q: How do I adjust the pressure on the 12-600XLHR?
A: Use a downstream pressure gauge to verify correct pressure setting. Adjust the bolt on the bell housing, but do not bottom the adjustment bolt.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
