Wilkins 112-950XL3 | Reduced Pressure Principle Backflow Assembly
Wilkins 112-950XL3 | Reduced Pressure Principle Backflow Assembly is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins 112-950XL3 | Reduced Pressure Principle Backflow Assembly
NOTICE: Product images may vary from the actual item due to differences in size or configuration options.
The Wilkins 112-950XL3 is a reduced pressure principle backflow prevention assembly designed to protect potable water systems against both backsiphonage and backpressure contamination where a potential health hazard exists.
Key Specifications:
- Size: 1 1/2 Inches
- Maximum Working Pressure: 25/175 PSI
- Maximum Temperature: 180°F (82°C)
- Notable Certifications: ASSE 1013, cUPC, CSA
- End Connections: Threaded FNPT
Other Related Variants:
- 114-950XL3: 1 1/4 Inch model size
- 1-950XL3: 1 Inch model size
- 2-950XL3: 2 Inch model size
- 34-950XL3: 3/4 Inch model size
Materials:
- Body: Low Lead Bronze ASTM B584
- Access Covers: Low Lead Cast Bronze ASTM B584
- Fasteners: 300 Series Stainless Steel
- Elastomers: Silicone (FDA Approved)
- Elastomers: Buna Nitrile (FDA Approved)
- Polymers: Noryl™
- Springs: 300 Series Stainless Steel
- Ball Valve Handles: Stainless Steel
Typical Installation:
Local codes shall govern installation requirements. To be installed in accordance with the manufacturers' instructions and the latest edition of the Uniform Plumbing Code. Unless otherwise specified, the assembly shall be mounted at a minimum of 12 inches (305mm) and a maximum of 30 inches (762mm) above adequate drains with sufficient side clearance for testing and maintenance. The installation shall be made so that no part of the unit can be submerged.
Standards Compliance:
ASSE Listed 1013; cUPC Listed; CSA Certified B64.4; UL Classified; C-UL Classified; AWWA Compliant C511; Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California; NSF/ANSI/CAN 61 & 372
Features & Benefits:
- Health Hazard Protection: Provides protection against both backsiphonage and backpressure of contaminated water into potable water supply systems.
- Lead-Free Construction: Meets NSF/ANSI/CAN 372 with less than 0.25% weighted average lead content, ideal for potable water applications.
- Full Port Ball Valves: Equipped with full port QT ball valves and integral test fittings for easy maintenance and testing accessibility.
- Durable Materials: Constructed with low lead bronze body, 300 series stainless steel fasteners and springs, and FDA-approved elastomers for long-lasting performance.
FAQ
Q: What is the minimum working pressure required for the Zurn 112-950XL3?
A: The Zurn 112-950XL3 requires a minimum working water pressure of 25 PSI and can operate up to a maximum of 175 PSI.
Q: Where should the Wilkins 112-950XL3 be installed?
A: The unit must be installed 12 to 30 inches above an adequate drain with sufficient side clearance for testing and maintenance. The assembly must not be submerged and should be positioned so no part can come into contact with standing water.
Q: Is the 112-950XL3 compatible with pressure reducing valves?
A: Yes, for optimal performance, it is recommended to use the 112-950XL3 with suggested pressure reducing valve models including Model 500XL3, 600XL3, or 625XL3.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
