Wilkins XT-8 | Water Thermal Expansion Tank, 2.1 Gal
Wilkins XT-8 | Water Thermal Expansion Tank, 2.1 Gal is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins XT-8 | Water Thermal Expansion Tank, 2.1 Gal
The Wilkins XT-8 is a water thermal expansion tank designed to protect potable water systems from pressure buildup caused by thermal expansion, keeping system pressure below relief valve settings.
Key Specifications:
- Tank Volume & Acceptance Volume: 2.1 gal total, 1.0 gal max acceptance
- Maximum Supply Pressure: 80 PSI
- Pre-charge Pressure: 40 PSI factory preset
- Notable Certifications: NSF/ANSI/CAN 61 & NSF/ANSI 372
- Connection Type: 3/4 NPT threaded
Other Related Variants:
- XT-18: 4.8 gallon version, 2.4 gal acceptance volume
- XT-35: 9.0 gallon version, 4.25 gal acceptance volume
Materials:
- Carbon Steel outer shell with epoxy finish
- Polypropylene liner
- Butyl rubber diaphragm
- Stainless steel connection
Typical Installation:
Local codes shall govern installation requirements. Unless otherwise specified, the assembly shall be mounted on the cold water supply and at least 18 inches from the cold water inlet to the heater. Pre-charge should be adjusted to match incoming water pressure (adjust pre-charge with no water pressure in tank). A properly sized pressure relief valve set at a maximum of 150 PSI must also be installed in the system. For installations that have a supply pressure above 80 PSI, a properly sized pressure reducing valve should be installed on the system.
Standards Compliance:
IAPMO Listed; Water Quality Association - Certified to NSF/ANSI/CAN 61 & NSF/ANSI 372; ANSI B1.20.1
Features & Benefits:
- Thermal Expansion Protection: The Zurn XT-8 protects water systems from pressure buildup when water heats and expands, preventing relief valve activation and potential system damage.
- Safe for Potable Water: The Zurn XT-8 features a polypropylene liner and butyl diaphragm certified to NSF/ANSI/CAN 61 & 372, ensuring safe contact with drinking water with 0.25% max weighted average lead content.
- Adjustable Pre-charge: Factory set at 40 PSI but adjustable up to 80 PSI to match specific system requirements, providing flexible installation options for various pressure conditions.
- Durable Construction: Carbon steel shell with epoxy finish and stainless steel connection ensures long-lasting performance in residential and commercial applications up to 200°F.
FAQ
Q: How do I determine the correct pre-charge pressure for my system?
A: The pre-charge should be adjusted to match incoming water pressure. Adjust pre-charge with no water pressure in the tank using the standard tire valve connection.
Q: Where should the expansion tank be installed in relation to the water heater?
A: The assembly should be mounted on the cold water supply and at least 18 inches from the cold water inlet to the heater, unless local codes specify otherwise.
Q: Can this expansion tank be used on fire sprinkler systems?
A: No, Model XT tanks are not suitable for use on fire sprinkler systems as required by NFPA 13 or 13D.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
