Wilkins 38-ZW3870XLT | Thermostatic Mixing Valve, 3/8" Compression
Wilkins 38-ZW3870XLT | Thermostatic Mixing Valve, 3/8" Compression is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins 38-ZW3870XLT | Thermostatic Mixing Valve, 3/8" Compres...
The Wilkins 38-ZW3870XLT is a point-of-use thermostatic mixing valve designed for scald protection at sinks and sensor faucets with precise temperature control.
Key Specifications:
- Size: 3/8 Inches
- Maximum Working Pressure: 145 psi
- Outlet Temperature Range: 95-115°F (35-46°C)
- Notable Certifications: ASSE 1070, cUPC, CSA B125.70
- Flow Rate: 0.06-3.10 GPM
Other Related Variants:
- 38-ZW3870XLT-4P: 4-port configuration with additional cold outlet port for individual or dual outlet applications
Materials:
- Low Lead Cast Bronze body (ASTM B 584) with Chrome Plating (ASTM B 456 Service Condition #2)
- Low Lead Brass internal components (ASTM B 927 UNS C27450)
- Polysufone Piston
- Noryl GFN2 Guide Tube
- 300 Series Stainless Steel Spring
- Viton Seals
- Acetal Co-Polymer Checks
Typical Installation:
The Zurn 38-ZW3870XLT is designed to be installed at the point of use under sinks and sensor faucets. The device is designed to be installed at a single outlet and may be used to supply individual outlets when there is sufficient supply pressure. It is suggested to use ball valves on the hot and cold inlet supplies.
Standards Compliance:
ASSE Listed 1070; cUPC Listed; CSA Certified B125.70; NSF/ANSI/CAN 61-9 Q≤1 (0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)
Features & Benefits:
- Scald Protection: Provides rapid response and precise temperature control meeting ASSE 1070 standards for fixtures, sinks, lavatories and bathtubs to prevent scalding injuries.
- Ultra Low Flow Compatibility: With a minimum flow rating of 0.06 GPM, the valve provides proper scald protection when used with ultra low flow faucet aerators.
- Integrated Safety Features: Includes integral check valves and strainer screens on hot and cold supply lines for enhanced protection and reduced maintenance.
- Lead-Free Construction: Chrome plated low lead cast bronze body meets NSF/ANSI/CAN 61-9 requirements, ideal for residential and commercial applications where lead-free valves are required.
FAQ
Q: What is the temperature adjustment range for the 38-ZW3870XLT?
A: The outlet temperature range is adjustable from 95-115°F (35-46°C) with a set temperature accuracy of +/- 3°F. The temperature must be field set during installation.
Q: What is the maximum pressure differential allowed between hot and cold inlets?
A: The maximum pressure differential is 15 psi between hot and cold inlets. The maximum working inlet pressure is 145 psi.
Q: What are the hot and cold supply temperature requirements?
A: The hot supply temperature range is 120-195°F max (49-90.5°C), and the cold supply temperature range is 40-75°F (4.4-23.8°C).
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
