Wilkins 212-500XLYSBR | 2 1/2" Pressure Reducing Valve with Integral By-pass
Wilkins 212-500XLYSBR | 2 1/2" Pressure Reducing Valve with Integral By-pass is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins 212-500XLYSBR | 2 1/2" Pressure Reducing Valve with In...
The Wilkins 212-500XLYSBR is a 2 1/2" water pressure reducing valve with integral by-pass check valve, designed for commercial and industrial potable water systems requiring high flow capacity and reliable pressure regulation.
Key Specifications:
- Size: 2 1/2 Inches
- Maximum Working Pressure: 300 psi
- Maximum Working Temperature: 140°F
- Notable Certifications: ASSE 1003, NSF/ANSI/CAN 61 & 372
- Connection Type: Less Union
Other Related Variants:
- 112-500XLYSBR: 1 1/2 Inches version
- 114-500XLYSBR: 1 1/4 Inches version
- 2-500XLYSBR: 2 Inches version
- 34-500XLYSBR: 3/4 Inches version
- 3-500XLYSBR: 3 Inches version
- 1-500XLYSBR: 1 Inches version
Materials:
- Body & Covers: Low Lead Bronze/Brass
- Fasteners: Stainless Steel, 300 series
- Elastomers: Buna Nitrile (FDA approved)
- Elastomers: EPDM (FDA approved)
- Strainer: Lead-Free Bronze
- Spring: Oil Tempered Wire, ASTM A 229
- Seat: Stainless Steel, 300 series
- Stem & Plunger: Low Lead Cast Bronze ASTM B 584
- Cap Gaskets: Natural Vulcanized Fibre
- Cap Gaskets: Acetal (Delrin™ 500)
Typical Installation:
Local codes shall govern installation requirements. Unless otherwise specified, the assembly shall be mounted in accordance with the manufacturers' instructions and the latest edition of the Uniform Plumbing Code. The assembly shall be installed with sufficient side clearance for testing and maintenance. The Model 500XL may be installed in any position. If installed in a pit, vault, or inside application, specify the "SC" sealed cage option. Multiple installations are recommend for wide demand variations or where the desired pressure reduction is more than 3 to 1 (i.e.: 150 psi inlet reduced to 50 psi outlet).
Standards Compliance:
ASSE Listed 1003; NSF/ANSI/CAN 61; NSF/ANSI/CAN 372; cUPC Listed; CSA Certified B356; City of Los Angeles Approved
Features & Benefits:
- High Flow Capacity: Designed specifically for industrial water lines and commercial water systems with demanding flow requirements.
- Thermal Expansion Protection: Direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion.
- Balanced Piston Design: Provides smooth and responsive reaction to changes in system flow demand while protecting from inlet pressure fluctuations.
- Flexible Installation: Can be installed in any position, with sealed cage option available for pit, vault, or inside installations.
FAQ
Q: What is the pressure reduction range for the Wilkins 212-500XLYSBR?
A: The Zurn 212-500XLYSBR has a reduced pressure range of 25-75 psi and is factory preset at 50 psi (field set).
Q: Can this valve be installed in any orientation?
A: Yes, the Zurn 212-500XLYSBR may be installed in any position. For installations in pits, vaults, or inside applications, specify the "SC" sealed cage option.
Q: What is the maximum pressure reduction ratio recommended for this valve?
A: Multiple installations are recommended for pressure reductions exceeding a 3:1 ratio (e.g., reducing 150 psi inlet to 50 psi outlet).
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
