Wilkins 2-600XLC | Water Pressure Reducing Valve with By-pass Check & Strainer
Wilkins 2-600XLC | Water Pressure Reducing Valve with By-pass Check & Strainer is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins 2-600XLC | Water Pressure Reducing Valve with By-pass Check...
NOTICE: Product images may vary from the actual item due to differences in size or configuration options.
The Wilkins 2-600XLC is a water pressure reducing valve with integral by-pass check valve and strainer, designed to reduce high inlet pressure to a lower outlet pressure while preventing thermal expansion buildup in residential and commercial water systems.
Key Specifications:
- Size: 2 Inches
- Maximum Working Water Pressure: 300 psi
- Maximum Working Water Temperature: 140°F
- Notable Certifications: ASSE 1003, IAPMO, CSA
- Connection Type: Copper Sweat Connection
Other Related Variants:
- 1/2-600XLC: 1/2 Inch size version
- 3/4-600XLC: 3/4 Inch size version
- 1-600XLC: 1 Inch size version
- 1 1/4-600XLC: 1 1/4 Inches size version
- 1 1/2-600XLC: 1 1/2 Inches size version
Materials:
- Main Valve Body: Low Lead Cast Bronze ASTM B 584
- Access Covers: Low Lead Cast Bronze ASTM B 584 / Low Lead Brass
- Fasteners: Stainless Steel, 300 Series
- Stem & Plunger: Low Lead Cast Bronze ASTM B 584 / Low Lead Brass
- Elastomers: Buna Nitrile (FDA Approved) / EPDM (FDA Approved)
- Cap Gaskets: Natural Vulcanized Fibre / Acetal (Delrin™)
- Strainer Screen: Stainless Steel, 300 Series
- Seat: Stainless Steel, 300 Series
Typical Installation:
Local codes shall govern installation requirements. Unless otherwise specified, the assembly shall be mounted in accordance with the latest edition of the Uniform Plumbing Code. The Model 600XL may be installed in any position. If installed in a pit, vault or inside application, specify the "SC" sealed cage option. Multiple installations are recommended for wide demand variations or where the desired pressure reduction is more than 4 to 1 (i.e.: 200 psi inlet reduced to 50 psi outlet). Anytime a reducing valve is adjusted, a pressure gauge must be used downstream to verify correct pressure setting. Do not bottom adjustment bolt on bell housing.
Standards Compliance:
ASSE Listed 1003; IAPMO Listed; CSA Certified; City of Los Angeles Approved; NSF/ANSI/CAN 61
Features & Benefits:
- Balanced Piston Design: Provides smooth and responsive operation to changes in system flow demand while protecting against inlet pressure fluctuations.
- Integral By-pass Check Valve: Prevents buildup of excessive system pressure caused by thermal expansion in closed water systems.
- Integrated Strainer: Built-in strainer with separate access cover allows for easy cleaning and maintenance in systems with sediment and debris.
- Versatile Installation: Can be installed in any position with sealed cage option available for pit, vault, or indoor applications.
FAQ
Q: Can the Zurn 2-600XLC be installed in any position?
A: Yes, the Zurn 2-600XLC may be installed in any position. If installed in a pit, vault, or inside application, specify the "SC" sealed cage option for optimal performance.
Q: What is the factory preset pressure for the Wilkins 2-600XLC?
A: The valve comes factory preset at 50 psi, with a standard reduced pressure range of 25 psi to 75 psi adjustable in the field.
Q: How do I properly adjust the downstream pressure on this valve?
A: Always use a pressure gauge downstream to verify the correct pressure setting when adjusting the valve. Do not bottom the adjustment bolt on the bell housing during adjustment.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
