Wilkins 12-ZW1070XLPF | 1/2" Thermostatic Mixing Valve, Z-Bite Push-Fit
Wilkins 12-ZW1070XLPF | 1/2" Thermostatic Mixing Valve, Z-Bite Push-Fit is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins 12-ZW1070XLPF | 1/2" Thermostatic Mixing Valve, Z-Bite...
NOTICE: Product images may vary from the actual item due to differences in size or configuration options.
The Wilkins 12-ZW1070XLPF is an Aqua-Gard® thermostatic mixing valve designed for point-of-use scald protection, featuring Z-Bite™ push-fit connections for fast, reliable installation with outlet temperature control from 95–115°F.
Key Specifications:
- Size: 1/2 Inches
- Maximum Working Pressure: 125 psi inlet
- Outlet Temperature Range: 95-115°F (35-46°C)
- Notable Certifications: ASSE 1070, cUPC, CSA B125.70
- Connection Type: Z-Bite push-fit tailpiece
Other Related Variants:
- 12-ZW1070XL: 1/2 Inch FNPT version
- 12-ZW1070XLC: 1/2 Inch copper sweat
- 12-ZW1070XLCPVC: 1/2 Inch CPVC version
- 12-ZW1070XLPEX: 1/2 Inch barb connection
- 12-ZW1070XLPEXF1960: 1/2 Inch barb F1960
- 1-ZW1070XLC: 1 Inch copper sweat
- 34-ZW1070XL: 3/4 Inch FNPT model
- 34-ZW1070XLC: 3/4 Inch copper sweat
- 38-ZW1070XLCOMP: 3/8 Inch compression connection
Materials:
- Body: Low Lead Cast Bronze, ASTM B 584 with Chrome Plating ASTM B 456 Service Condition #2
- Internal Brass: Low Lead Brass, ASTM B 927, UNS C27450
- Piston: Polysufone
- Guide Tube: Noryl GFN2
- Spring & Screen: 300 Series Stainless Steel
- Seals: Viton
- Checks: Noryl GFN2
Typical Installation:
The Zurn 12-ZW1070XLPF is designed for point-of-use installation at plumbing fixtures and appliances for final control of water temperature. Ideal for installation at sinks, lavatories, bathtubs, and sensor faucets. The device is designed to be installed at a single outlet and may be used to supply individual outlets when there is sufficient supply pressure. Ball valves on the hot and cold inlet supplies are suggested.
Standards Compliance:
ASSE Listed 1070; cUPC Listed; CSA Certified B125.70; NSF/ANSI/CAN 61-9 Q≤1 (0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)
Features & Benefits:
- Scald Protection: Rapid response thermostatic control mixes hot and cold water to a safer temperature of 95-115°F, preventing scalding injuries at point-of-use fixtures.
- Z-Bite Push-Fit Technology: Push-fit tailpiece connections provide quick, reliable installation without soldering or threading, reducing installation time and labor costs.
- Lead-Free Compliance: Constructed with low lead cast bronze meeting NSF/ANSI/CAN 61-9 requirements with 0.25% maximum weighted average lead content for safe potable water applications.
- High Flow Capacity: Delivers up to 10 GPM flow rate at 45 psi pressure loss with minimum flow of 0.25 GPM, suitable for residential and commercial applications.
FAQ
Q: What is the maximum pressure differential allowed between hot and cold inlets for the Wilkins 12-ZW1070XLPF?
A: The maximum pressure differential is 15 psi between hot and cold inlets. The maximum working inlet pressure is 125 psi.
Q: Does the Zurn 12-ZW1070XLPF come pre-set to a specific temperature?
A: No, the temperature must be field set. The valve can be adjusted within an outlet temperature range of 95-115°F with set temperature accuracy of +/- 3°F.
Q: Can this thermostatic mixing valve be used to supply multiple fixtures?
A: The device is designed to be installed at a single outlet for individual use. It may be used to supply individual outlets when there is sufficient supply pressure, but it is not intended for multiple fixture distribution systems.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
