Wilkins 12-ZW1070XLPEXF1960 | Aqua-Gard® Thermostatic Mixing Valve, 1/2" PEX
Wilkins 12-ZW1070XLPEXF1960 | Aqua-Gard® Thermostatic Mixing Valve, 1/2" PEX is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins 12-ZW1070XLPEXF1960 | Aqua-Gard® Thermostatic Mixing Valve,...
The Wilkins 12-ZW1070XLPEXF1960 Aqua-Gard® thermostatic mixing valve provides point-of-use scald protection with rapid temperature response for safe water delivery.
Key Specifications:
- Size: 1/2 Inches
- Maximum Working Pressure: 125 psi
- Outlet Temperature Range: 95-115°F max
- Notable Certifications: ASSE 1070, cUPC, CSA
- Connection Type: 1/2" PEX F1960 Barb
Other Related Variants:
- 12-ZW1070XL: 1/2 Inch FNPT version
- 12-ZW1070XLC: 1/2 Inch CU Sweat version
- 12-ZW1070XLCPVC: 1/2 Inch CPVC version
- 12-ZW1070XLPEX: 1/2 Inch PEX Barb version
- 12-ZW1070XLPF: 1/2 Inch Z-Bite push fit version
- 1-ZW1070XLC: 1 Inch CU Sweat version
- 34-ZW1070XL: 3/4 Inch FNPT version
- 34-ZW1070XLC: 3/4 Inch CU Sweat version
- 38-ZW1070XLCOMP: 3/8 Inch Compression version
Materials:
- Body: Low Lead Cast Bronze with Chrome Plating, ASTM B 584, ASTM B 456
- Internal Brass: Low Lead Brass, ASTM B 927, UNS C27450
- Piston: Polysufone
- Guide Tube: Noryl GFN2
- Spring & Screen: 300 Series Stainless Steel
- Seals: Viton
- Checks: Noryl GFN2
Typical Installation:
The Zurn 12-ZW1070XLPEXF1960 is designed for point-of-use installation at plumbing fixtures and appliances including sinks, lavatories, bathtubs, individual outlets, and sensor faucets where final control of water temperature is required. The device should be installed at a single outlet and may be used to supply individual outlets when there is sufficient supply pressure.
Standards Compliance:
ASSE Listed 1070; cUPC Listed; CSA Certified B125.70; NSF/ANSI/CAN 61-9 Q≤1
Features & Benefits:
- Scald Protection: Provides extremely rapid response rate to mix hot and cold water to a safer final temperature of 95-115°F, preventing scalding at point of use.
- Lead-Free Construction: Meets 0.25% maximum weighted average lead content requirement for compliance with NSF/ANSI/CAN 61-9, ideal where lead-free valves are required.
- Versatile Installation: Available in multiple end configurations including PEX F1960 barb connections, suitable for all residential and commercial plumbing applications.
- High Flow Capacity: Delivers up to 10 GPM flow rate at 45 psi pressure loss with minimum flow rate of 0.25 GPM for flexible application use.
FAQ
Q: What is the maximum pressure differential allowed between hot and cold inlets?
A: The maximum pressure differential is 15 psi between hot and cold inlets for proper operation.
Q: Does the temperature need to be set during installation?
A: Yes, the temperature must be field set during installation with an accuracy of +/- 3°F.
Q: What are the recommended shutoff valves for installation?
A: It is suggested to use ball valves on both the hot and cold inlet supplies for optimal control and maintenance.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
