Wilkins 1-SXL | Cast Bronze Y-Type Strainer | 1 Inches
Wilkins 1-SXL | Cast Bronze Y-Type Strainer | 1 Inches is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Wilkins 1-SXL | Cast Bronze Y-Type Strainer | 1 Inches
The Wilkins 1-SXL is a 1 Inches cast bronze Y-type strainer designed to protect potable water systems from sediment damage.
Key Specifications:
- Size: 1 Inches (25mm)
- Pressure Rating: 300 psi WOG
- Temperature Rating: 180°F maximum
- Notable Certifications: NSF/ANSI/CAN 61; NSF/ANSI/CAN 372
- End Connections: Threaded FNPT ANSI B1.20.1
Other Related Variants:
- 12-SXL: 1/2 Inches NPT version
- 34-SXL: 3/4 Inches NPT version
- 114-SXL: 1 1/4 Inches NPT version
- 112-SXL: 1 1/2 Inches NPT version
- 2-SXL: 2 Inches NPT version
- 212-SXL: 2 1/2 Inches NPT version
- 3-SXL: 3 Inches NPT version
Materials:
- Main Valve Body: Low Lead Cast Bronze ASTM B806
- Access Cover and Plug: Low Lead Cast Bronze ASTM B806
- Screen: 20 Mesh 300 Series Stainless Steel
- O-Ring: Buna Nitrile
- Closure Plug: Brass
Typical Installation:
Local codes shall govern installation requirements. Unless otherwise specified, the assembly shall be mounted in accordance with the latest edition of the Uniform Plumbing Code. If installed below grade, be certain adequate drainage is provided to prevent the device from being submerged. Horizontal installation with the strainer cap facing downward is the preferred installation orientation; however, the Zurn 1-SXL strainer will provide protection in any orientation. Typical outdoor installations include use upstream of water pressure reducing valves and reduced pressure backflow preventers, installed between 12 inches minimum and 30 inches maximum above grade within a protective enclosure.
Standards Compliance:
NSF/ANSI/CAN 61; NSF/ANSI/CAN 372 (Lead Free)
Features & Benefits:
- Equipment Protection: Filters sediment from potable water lines to prevent premature failure of regulators, backflow preventers, and other delicate downstream equipment.
- Lead-Free Construction: Low lead cast bronze body and cover (ASTM B806) comply with NSF/ANSI/CAN 372, making the Zurn 1-SXL safe for potable water applications.
- Accessible Screen Maintenance: The 20 mesh 300 series stainless steel screen is accessible for cleaning and maintenance without removing the device from the line.
- Flexible Installation: Preferred horizontal orientation with cap facing down, but functional in any orientation to suit a wide range of installation scenarios.
FAQ
Q: What type of water service is the Wilkins 1-SXL rated for?
A: The Wilkins 1-SXL is rated for potable water service, including residential and commercial domestic water and irrigation systems, and complies with NSF/ANSI/CAN 61 and NSF/ANSI/CAN 372.
Q: Can the strainer be installed vertically?
A: Yes. While horizontal installation with the strainer cap facing downward is preferred, the strainer will provide protection in any orientation.
Q: Can the screen be serviced without removing the strainer from the pipeline?
A: Yes. The stainless steel strainer screen is accessible for maintenance without removing the device from the line, minimizing system downtime.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
