Oasis PGV8AC | Vandal Resistant Refrigerated Drinking Fountain w/ 8 GPH Chiller
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Oasis PGV8AC | Vandal Resistant Refrigerated Drinking Fountain w/ 8...
The Oasis PGV8AC (504404) is a wall-mounted, vandal resistant refrigerated drinking fountain delivering 8.0 GPH of chilled water.
Key Specifications:
| Finish | Brushed Stainless Steel |
| Activation | Vandal Resistant Mechanical Front Push Button |
| Filtration | Non-Filtered. Optional Universal Filter Kits - Pressure (VersaFilter III, Total PFAS and Pharmaceutical) Can Be Added for Filtered Option |
| Refrigeration | 8.0 GPH of 50°F Drinking Water at 90°F Ambient and 80°F Inlet Water, R-134a Refrigerant, 1/4 HP Compressor |
| Power | 115 Volts, 60 Hz, 4.6 Full Load Amps, 460 Rated Watts |
Why choose Oasis PGV8AC:
- Chilled Water Performance: A high efficiency cooling system with R-134a refrigerant and a 1/4 HP compressor delivers 8.0 GPH of 50°F drinking water, rated per ASHRAE 18 testing.
- Vandal Resistant Build: Vandal resistant fasteners, a galvanized steel louver and bottom screens, and a heavy duty galvanized steel frame with stainless steel top suit high-traffic public areas.
- Water Saving Bubbler: The vandal resistant antimicrobial bubbler with flexible guard reduces waste water by 50%. A built-in 100 micron strainer stops particles before they enter the waterway.
- Easy Installation and Service: It ships with a wall mounting bracket and complete instructions. Removable side and front panels give easy access during installation.
FAQ
Q: Does the Oasis PGV8AC Include a Water Filter?
A: No, this model is non-filtered. Optional Universal Filter Kits - Pressure are available at additional cost: VersaFilter III, Total PFAS and Pharmaceutical.
Q: What Are the Electrical and Plumbing Requirements for the PGV8AC?
A: The cooler runs on 115 volts, 60 Hz and draws 4.6 full load amps. It uses a 3/8 in O.D. water inlet with strainer and a 1-1/4 in IPS waste stub out, and operates at 20 to 100 PSI. The trap, stop valve, and electrical outlet are not furnished.
Q: How Much Clearance Does the PGV8AC Need for Ventilation?
A: Allow a minimum of 4 inches (102 mm) per side for proper ventilation. Consult local, state, and federal codes for the correct mounting height before roughing in.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Oasis PGV8AC is a wall-mounted, vandal resistant refrigerated drinking fountain with 8.0 GPH chilling and a front push button.
Before You Begin
- Tools: A screwdriver for the stream adjustment and standard tools for mounting the wall hanger. The trap, shut-off valve, and electrical outlet are not furnished.
- Plumbing: Provide a 3/8" O.D. copper water supply with shut-off valve and a 1-1/4" IPS waste connection. The unit operates at up to 100 PSI, so install a pressure regulator if spikes could exceed that. Flush the supply line before installing.
- Electrical and ventilation: Provide a 115V outlet with 20A minimum GFCI protection. Allow 4" of clearance per side for ventilation.
- Safety and support: Some states require a licensed plumber, and all connections must meet local plumbing codes. Do not alter or modify the unit, as this voids the warranty and UL listing.
- Installation reference: See the installation manual for the rough-in drawing and detailed instructions.
Step-by-Step Installation Guide
- Prepare the rough-in: Install the plumbing and electrical service per the manual's rough-in drawing, and flush the building supply line before connecting the unit.
- Hang the unit: Mount the wall hanger, which ships fastened to the back of the unit, and hang the cooler on it.
- Connect water and waste: Install a trap in the waste line and a shut-off valve in the supply line, then connect the 3/8" copper Water Supply tube to the valve without a solder joint. Keep the in-line strainer installed, and wrap any internal trap with insulating tape to prevent sweating.
- Check the fan and connect power: Rotate the fan blade by hand to confirm it is free of obstructions, then plug the cord into the GFCI outlet. For an external outlet, route the cord through the rear knockout and use a Heyco #2184 bushing.
- Fill the tank: Open the shut-off valve and press the push button, running water until the stream is free of bubbles.
- Adjust the stream: Remove the bezel and button from the front of the cooler to reach the regulator, then turn it clockwise with a screwdriver to raise the stream height.
Looking for the Oasis PGV8AC Vandal Resistant Refrigerated Drinking Fountain?
