Oasis PG8SBFSL | Bi-Level Refrigerated Fountain w/ Mechanical Bottle Filler
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Oasis PG8SBFSL | Bi-Level Refrigerated Fountain w/ Mechanical Bottl...
The Oasis PG8SBFSL Series is a wall-mounted bi-level refrigerated drinking fountain with a mechanical VersaFiller bottle filler for indoor use.
Key Specifications:
| Finish | Greystone (507317), Sandstone (507318), Stainless Steel (507319) |
| Activation | Independent manual activation on the bottle filler and fountain; four push pads on the lower fountain |
| Filtration | Non-Filtered. Optional VersaFilter III Universal Retrofit Kit (041253-001), Total PFAS Universal Retrofit Kit (041253-005) or Pharmaceutical Universal Retrofit Kit (041253-006) Can be Added for Filtered Option |
| Refrigeration | 8.0 GPH of 50°F water at 90°F ambient and 80°F inlet water; R-134a high efficiency cooling system |
| Power | 115 Volts, 60 Hz, 5.0 full load amps, 500 rated watts. Requires a grounded duplex receptacle on a 20A minimum GFCI device. |
Why choose Oasis PG8SBFSL:
- Chilled Hydration: The high efficiency R-134a cooling system delivers 8.0 GPH of 50°F water. The thermostat is accessible externally with a tool-activated OFF position.
- Two Dispensing Options: The bi-level design pairs a lower fountain with a mechanical VersaFiller bottle filler. Each has independent manual activation.
- Antimicrobial Protection: Key VersaFiller components contain Freshield, a silver-based antimicrobial compound. The flexible water saver bubbler also carries the additive and reduces waste water by 50%.
- Durable, Filter-Ready Build: The unit has a stainless steel top and a heavy duty galvanized steel frame. The bottle filler cabinet has space for all OASIS filters, which are accessed through the top with Tilt 'N Tether.
Variant Option:
- PG8SBFSLGST (507317): Greystone powder coat on galvanized steel, the standard finish.
- PG8SBFSLSAN (507318): Sandstone powder coated paint finish.
- PG8SBFSLSTN (507319): Stainless steel finish.
FAQ
Q: Can I Add Filtration to the Oasis PG8SBFSL?
A: Yes. The unit ships without a filter, but the bottle filler cabinet has ample space for all OASIS filters. Optional retrofit kits include the VersaFilter III (041253-001), Total PFAS (041253-005) and Pharmaceutical (041253-006).
Q: How Is the Oasis PG8SBFSL Activated?
A: The bottle filler and the fountain each have independent manual activation. The lower fountain has four push pads that start the flow of water.
Q: What Plumbing and Electrical Connections Does the Oasis PG8SBFSL Need?
A: It needs a 3/8" O.D. water inlet with strainer and a 1-1/4" O.D. tailpiece drain. It runs on 115 Volts, 60 Hz and requires a grounded duplex receptacle on a 20A minimum GFCI device. The trap, stop valve and electrical outlet are not furnished.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Oasis PG8SBFSL is a wall-mounted bi-level refrigerated drinking fountain with a mechanical bottle filler, delivering 8.0 GPH of chilled water.
Before You Begin
- Tools: Power drill with pilot bit, T15 Torx driver, #2 Phillips and slotted screwdrivers, 1/4" nut driver, bubble level, tape measure, and a tool for cutting plastic pipe.
- Not included: Wall anchors and fasteners, a 1-1/4" P-trap, and a water shut-off valve.
- Plumbing: Provide a 3/8" water supply stub-out and a 1-1/4" IPS drain stub-out. Maximum supply pressure is 100 PSI. Use a regulator if pressure spikes could exceed it.
- Electrical and ventilation: A 20A minimum GFCI-protected outlet is required. The bottle filler is mechanical and needs no separate electrical connection. Allow 4" of clearance per side, and always mount the cooler on the right for airflow.
- Codes and reference: Some states require a licensed plumber. Check local codes for mounting height, and see the installation manual for rough-in diagrams.
Step-by-Step Installation Guide
- Hang and secure the units: Flush the building water supply line first. Mount the hanger brackets level with 2 anchors each, then hang the cooler on the right and the fountain on the left. Both must rest on their galvanized steel frames, not under the stainless steel basin return edge. Remove the front panels (2 front T15 screws at the base and 2 under the fountain nose), mark the anchor holes, take the units down to drill the pilot holes, then rehang and anchor them. For a left-side-high layout, swap the patch plate and waste drains between units.
- Connect the drain and water: Install the supplied drain parts, with the sponge tubing on the brass drain pipe, and connect a P-trap to the drain stub-out. Connect the supplied copper inlet tube to the shut-off valve. Replace the push-fit plug on the cold tank with the 1/4" union and connect the fountain's insulated 1/4" line to it. Turn on the water, press the push pads until both bubblers run steady, and check for leaks.
- Mount the bottle filler frame: Connect the supplied tee and tube so chilled water feeds both the fountain valve and the bottle filler. Feed the tubing up through the bushing in the lower unit's top. Center the rubber gasket on the unit top against the wall, set the wall frame on it, and fasten it to the wall, pulling the tubing up through the frame.
- Connect the bottle filler: Slide the sponge insulation over the water line and connect it to the inlet elbow on the back of the bottle filler. Attach the tether to the cleat on the mounting frame.
- Attach the cabinet: Set the bottle filler cabinet into the gasket groove on both sides and the front. Secure the cabinet and top cap with the 2 Torx screws.
- Power up and test: Spin the condenser fan blade by hand to confirm it's clear, then plug in the unit. Press the bottle filler's activation button to release trapped air, and check all connections for leaks. Adjust the fountain stream to at least 4" high, then reinstall the front panels.
Looking for the Oasis PG8SBFSL Bi-Level Refrigerated Fountain with Bottle Filler?
