Oasis PG8SBF | Refrigerated Drinking Fountain w/ Mechanical Bottle Filler
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Oasis PG8SBF | Refrigerated Drinking Fountain w/ Mechanical Bottle ...
Oasis PG8SBF Series is a wall-mounted refrigerated VersaCooler fountain with a mechanical bottle filler delivering 8.0 GPH chilled water.
Key Specifications:
| Finish | Greystone (507299), Sandstone (507300), Stainless Steel (507302) |
| Activation | Independent manual push-button on the bottle filler; four push pads on the fountain |
| Filtration | Non-Filtered. Optional OASIS VersaFilter III Universal Retrofit Kit 041253-001 Can be Added for Filtered Option |
| Refrigeration | 8.0 GPH of 50°F Water Chiller Included (R-134a refrigerant) |
| Power | 115 Volts, 60 Hz, 5.0 Full Load Amps, 500 Rated Watts |
Why choose Oasis PG8SBF:
- Chilled Water on Demand: The high efficiency refrigerated cooling system delivers 8.0 GPH of 50°F drinking water under ASHRAE 18 rating conditions.
- Dual Hydration Options: A VersaCooler fountain and a mechanical bottle filler with a 13 in dispense height are combined in one wall-mounted unit.
- Durable, Hygienic Construction: A stainless steel top, a heavy duty galvanized steel frame and Freshield silver-based antimicrobial protection on key VersaFiller components support long-term use.
- Easy Upgrade and Maintenance: Space inside the bottle filler cabinet accommodates OASIS retrofit filters, and the filter is accessed through the top with Tilt 'N Tether.
Variant Option:
- PG8SBFGST (507299): Greystone powder coat on galvanized steel finish with the refrigerated VersaCooler fountain and mechanical bottle filler.
- PG8SBFSAN (507300): Sandstone powder coated paint finish with the refrigerated VersaCooler fountain and mechanical bottle filler.
- PG8SBFSTN (507302): Stainless steel finish (at additional cost) with the refrigerated VersaCooler fountain and mechanical bottle filler.
FAQ
Q: Can Filtration Be Added to the Oasis PG8SBF?
A: Yes. The unit is not filtered as standard, but the bottle filler cabinet has space for all OASIS filters. Optional retrofit kits include the VersaFilter III (041253-001), Total PFAS (041253-005) and Pharmaceutical (041253-006) kits.
Q: What Electrical and Plumbing Connections Are Required?
A: The unit needs a grounded North American duplex receptacle (115V, 60 Hz) on a minimum 20A GFCI circuit. Plumbing connections are a 3/8 in O.D. water inlet with strainer and a 1-1/4 in IPS waste stub out. Water pressure should be between 20 and 100 PSI. The trap, stop valve and electrical outlet are not furnished.
Q: How Does the Bottle Filler Operate?
A: The bottle filler has independent manual push-button activation. The lower fountain unit has four push pads to start the flow of chilled water.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Oasis PG8SBF is a wall-mounted refrigerated drinking fountain with a mechanical bottle filler, delivering 8.0 GPH of chilled water to both the fountain and the filler.
Before You Begin
- Tools: Power drill with pilot bit, T15 Torx driver, #2 Phillips and slotted screwdrivers, 1/4" nut driver, bubble level, and tape measure.
- Not included: Wall anchors and fasteners, a 1-1/4" P-trap, and a water shut-off valve.
- Plumbing: Provide a 3/8" water supply stub-out and a 1-1/4" IPS drain stub-out. Maximum supply pressure is 100 PSI. Use a regulator if pressure spikes could exceed it.
- Electrical and ventilation: A 20A minimum GFCI-protected outlet is required. The bottle filler is mechanical and needs no separate electrical connection. Allow 4" of clearance per side for ventilation.
- Codes and reference: Some states require a licensed plumber. Check local codes for mounting height, and see the installation manual for rough-in dimensions.
Step-by-Step Installation Guide
- Hang and secure the cooler: Flush the building water supply line first. Mount the hanger bracket level with 2 anchors, then hang the unit on the galvanized steel frame, not under the stainless steel basin's return edge. Remove the front panel (2 front T15 screws at the base and 2 under the fountain nose), mark the 2 lower anchor locations, then take the unit down to drill the pilot holes. Rehang and anchor it.
- Connect the drain and water: Install a P-trap between the drain stub-out and the basin drainpipe. Connect the supplied copper inlet tube to the shut-off valve, leaving the 1/4" line on the cartridge valve connected. Turn on the water and press the push pads until the stream is steady.
- Connect the bottle filler line: Take the 1/4" tube from inside the access panel, remove the plug from the cold tank fitting, and insert the tube end. Feed the tubing up through the bushing in the top of the unit.
- Mount the bottle filler frame: Center the rubber gasket on top of the cooler against the wall. Set the wall frame on the gasket, mark the holes, and fasten it to the wall. Pull the plastic tubing up through the frame opening.
- Connect and attach the bottle filler: Slide the sponge insulation over the water line and connect it to the inlet elbow on the back of the bottle filler. Attach the tether to the cleat on the mounting frame. Then set the cabinet into the gasket groove and secure it and the top cap with the 2 Torx screws.
- Power up and test: Spin the condenser fan blade by hand to confirm it's clear, then plug in the unit. Press the bottle filler's activation button to release trapped air, and check all connections for leaks. Adjust the fountain stream to at least 4" high, then reinstall the front panel.
Looking for the Oasis PG8SBF Refrigerated Drinking Fountain with Bottle Filler?
