Oasis PG8FEBFSL | Bi-Level Refrigerated Fountain w/ Electronic Bottle Filler
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Oasis PG8FEBFSL | Bi-Level Refrigerated Fountain w/ Electronic Bott...
The Oasis PG8FEBFSL Series is a wall-mounted, refrigerated bi-level fountain with a contactless electronic bottle filler.
Key Specifications:
| Finish | Greystone (Powder Coat on Galvanized Steel), Sandstone (Powder Coated Paint) or Stainless Steel |
| Activation | Contactless Sensor on Bottle Filler with Programmable Auto Shut Off. Manual Push Pads on Fountains. |
| Filter Performance | VersaFilter III (FVF): Lead, Particulate Class I, Chlorine Taste & Odor, Microplastics up to 4,750 Gal. Total PFAS (FPF) and Pharmaceutical (FRX) filter options are also available. |
| Refrigeration | 8.0 GPH Water Chiller Included (50°F Water at 90°F Ambient and 80°F Inlet Water), R-134a Refrigerant |
| Power | 115 Volts, 60 Hz, 5.0 Full Load Amps, 500 Rated Watts. Requires a grounded outlet on a 20A GFCI device (not furnished). |
Why choose Oasis PG8FEBFSL:
- Two Hydration Heights in One Unit: The bi-level design pairs a standard-height fountain with a higher refrigerated fountain and electronic bottle filler, so one wall-mounted unit serves different users.
- Cold, Filtered Water: A high efficiency cooling system delivers 8.0 GPH of 50°F water. The filter sits in the top bottle filler and is replaced with Tilt 'N Tether. A built-in filter monitor and bottle counter track usage.
- Hygienic, Low-Waste Operation: The contactless laminar flow bottle filler, Freshield silver-based antimicrobial components and flexible water saver bubbler (reduces waste water by 50%) support cleaner, more efficient use.
- Durable and Serviceable: A stainless steel top, heavy duty galvanized steel frame and self-scouring waste drain are built for lasting use. External thermostat and stream height adjustment and removable panels simplify service and installation.
Variant Option:
- PG8FEBFSLGST-FVF (507043FVF): Greystone powder coat finish with the VersaFilter III (FVF) for lead, Particulate Class I, chlorine, taste, odor and microplastics reduction to 4,750 gallons.
- PG8FEBFSLGST-FPF (507043FPF): Greystone powder coat finish with the Total PFAS Filter (FPF).
- PG8FEBFSLGST-FRX (507043FRX): Greystone powder coat finish with the Pharmaceutical Filter (FRX).
- PG8FEBFSLSAN-FVF (507044FVF): Sandstone powder coated finish with the VersaFilter III (FVF) for lead, Particulate Class I, chlorine, taste, odor and microplastics reduction to 4,750 gallons.
- PG8FEBFSLSAN-FPF (507044FPF): Sandstone powder coated finish with the Total PFAS Filter (FPF).
- PG8FEBFSLSAN-FRX (507044FRX): Sandstone powder coated finish with the Pharmaceutical Filter (FRX).
- PG8FEBFSLSTN-FVF (507045FVF): Stainless steel finish with the VersaFilter III (FVF) for lead, Particulate Class I, chlorine, taste, odor and microplastics reduction to 4,750 gallons.
- PG8FEBFSLSTN-FPF (507045FPF): Stainless steel finish with the Total PFAS Filter (FPF).
- PG8FEBFSLSTN-FRX (507045FRX): Stainless steel finish with the Pharmaceutical Filter (FRX).
FAQ
Q: What Electrical Connection Does the Oasis PG8FEBFSL Require?
A: The unit runs on 115 Volts, 60 Hz and draws 5.0 full load amps (500 rated watts). To meet UL requirements, it needs a grounded North American duplex receptacle connected to a minimum 20A GFCI device. The outlet is not furnished.
Q: How Is Water Dispensed From the Bottle Filler and Fountains?
A: The bottle filler uses a contactless sensor with laminar flow and programmable auto shut off. The fountains are activated manually with push pads.
Q: Where Is the Filter Located and How Is It Replaced?
A: The filter is in the top bottle filler and is replaced using the Tilt 'N Tether design. The VersaFilter III (FVF) uses replacement cartridge OASIS Item #041145-001 and is certified to NSF/ANSI 42, 53, 372 and 401 for filtration up to 4,750 gallons.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Oasis PG8FEBFSL is a wall-mounted refrigerated bi-level fountain with a contactless, filtered bottle filler, delivering 8.0 GPH of chilled water. Filter options include VersaFilter III, Total PFAS, and Pharmaceutical.
Before You Begin
- Tools: Power drill with pilot bit, T15 Torx driver, #2 Phillips and slotted screwdrivers, 1/4" nut driver, bubble level, tape measure, and a tool for cutting plastic pipe.
- Not included: Wall anchors and fasteners, a 1-1/4" P-trap, and a water shut-off valve.
- Plumbing: Provide a 3/8" water supply stub-out and a 1-1/4" IPS drain stub-out. Maximum supply pressure is 100 PSI. Use a regulator if pressure spikes could exceed it.
- Electrical and ventilation: The cooler and bottle filler each have a power cord, so you need two outlets or a splitter, on a 20A minimum GFCI device. Allow 4" of clearance per side. The cooler must always be on the right side for airflow.
- Codes and reference: Some states require a licensed plumber. Check local codes for mounting height, and see the installation manual for rough-in diagrams.
Step-by-Step Installation Guide
- Hang and secure the units: Flush the building water supply line first. Mount the hanger brackets level with 2 anchors each, then hang the cooler on the right and the fountain on the left. Both must rest on their galvanized steel frames, not under the stainless steel basin return edge. Remove the front panels (2 front T15 screws at the base and 2 under the fountain nose), mark the anchor holes, take the units down to drill the pilot holes, then rehang and anchor them. For a left-side-high layout, swap the patch plate and waste drains between units.
- Connect the drain and water: Install the supplied drain parts, with the sponge tubing on the brass drain pipe, and connect a P-trap to the drain stub-out. Connect the supplied copper inlet tube to the shut-off valve. Replace the push-fit plug on the cold tank with the 1/4" union and connect the fountain's insulated 1/4" line to it. Turn on the water, press the push pads until both bubblers run steady, and check for leaks.
- Mount the bottle filler frame: Connect the supplied tee and tube so chilled water feeds both the fountain valve and the bottle filler. Feed the tubing up through the bushing in the lower unit's top. Center the rubber gasket on the unit top against the wall, set the wall frame on it, and fasten it to the wall, pulling the tubing up through the frame.
- Install and flush the filter: Insert the filter cartridge and turn it a quarter turn until it locks. Route the filter head's inlet tube through the frame and top to the water supply, and direct the outlet tube to the fountain drain. Turn on the water and flush the filter, then connect the outlet tube to the cooling tank inlet fitting.
- Connect and mount the bottle filler: Slide the sponge insulation over the water line and connect it to the solenoid valve inlet. Attach the tether to the cleat on the mounting frame. Feed the power supply terminals and green ground wire through the bushing, connect the terminals, and attach the ground wire to the cooler frame ground. Set the cabinet into the gasket groove, secure it with the supplied Torx screws, then install the drip tray and anti-splash grate.
- Power up and test: Spin the condenser fan blade by hand to confirm it's clear, then plug in both power cords. Turn on the water and place a container in the alcove to release trapped air, then check for leaks. Adjust the fountain stream to at least 4" high. Reinstall the front panels and the bottle filler top cap.
Looking for the Oasis PG8FEBFSL Bi-Level Refrigerated Fountain with Filtered Bottle Filler?
