Oasis PG8EBFSL | Refrigerated Bi-Level Fountain w/ Contactless Bottle Filler
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Oasis PG8EBFSL | Refrigerated Bi-Level Fountain w/ Contactless Bott...
The Oasis PG8EBFSL Series is a wall-mounted refrigerated bi-level fountain with a contactless VersaFiller bottle filler for indoor use.
Key Specifications:
| Finish | Greystone (GST), Sandstone (SAN), Stainless Steel (STN) |
| Activation | Contactless sensor on bottle filler; manual push pads on fountain |
| Filtration | Non-Filtered. Optional 041253-001, 041253-005 or 041253-006 Retrofit Kit Can be Added for Filtered Option |
| Refrigeration | 8.0 GPH Water Chiller Included (R-134a refrigerant) |
| Power | 115 Volts, 60 Hz, 5.0 Amps, 500 Watts |
Why choose Oasis PG8EBFSL:
- Chilled Water on Demand: A high efficiency cooling system with R-134a refrigerant delivers 8.0 GPH of 50°F drinking water.
- Two Ways to Hydrate: The bi-level design pairs a refrigerated fountain with four push pads and a VersaFiller contactless bottle filler with laminar flow and programmable auto shut off.
- Built-In Protection and Monitoring: Freshield silver-based antimicrobial components, a 100 micron strainer, an LED lighted alcove, and a built-in filter monitor and bottle counter.
- Durable and Serviceable: A stainless steel top and heavy duty galvanized steel frame, with removable side and front panels for easy access.
Variant Option:
- PG8EBFSLGST (507036): Greystone powder coat on galvanized steel, the standard finish, with the refrigerated bi-level fountain and electronic bottle filler.
- PG8EBFSLSAN (507037): Sandstone powder coated paint finish with the same refrigerated bi-level fountain and electronic bottle filler.
- PG8EBFSLSTN (507038): Stainless steel finish, available at additional cost, with the same refrigerated bi-level fountain and electronic bottle filler.
FAQ
Q: Does the Oasis PG8EBFSL Include a Water Filter?
A: No. No filter is included on any variant. The unit has a built-in 100 micron strainer and space in the bottle filler cabinet for filtration. OASIS Retrofit Kits 041253-001, 041253-005 and 041253-006 are available as optional add-ons.
Q: What Electrical and Plumbing Connections Are Required?
A: The unit needs a grounded North American duplex receptacle on a minimum 20A GFCI circuit (115V, 60 Hz). It also needs a 3/8" O.D. water inlet and a plumbed drain, and it operates at 20 to 100 PSI. The trap, stop valve and electrical outlet are not furnished, and 4 inches per side should be left for ventilation.
Q: Can the Oasis PG8EBFSL Be Installed for Either Right or Left Side Use?
A: Yes. The universal design supports a high right or high left configuration. It ships with a wall mounting bracket and complete instructions, and local, state and federal codes should be consulted for mounting height before rough-in.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Oasis PG8EBFSL is a wall-mounted refrigerated bi-level fountain with a contactless VersaFiller bottle filler, delivering 8.0 GPH of chilled water.
Before You Begin
- Tools: Power drill with pilot bit, T15 Torx driver, #2 Phillips and slotted screwdrivers, 1/4" nut driver, bubble level, tape measure, and a tool for cutting plastic pipe.
- Not included: Wall anchors and fasteners, a 1-1/4" P-trap, and a water shut-off valve.
- Plumbing: Provide a 3/8" water supply stub-out and a 1-1/4" IPS drain stub-out. Maximum supply pressure is 100 PSI. Use a regulator if pressure spikes could exceed it.
- Electrical and ventilation: The cooler and bottle filler each have a power cord, so you need two outlets or a splitter, on a 20A minimum GFCI device. Allow 4" of clearance per side. The cooler must always be on the right side for airflow.
- Codes and reference: Some states require a licensed plumber. Check local codes for mounting height, and see the installation manual for rough-in diagrams.
Step-by-Step Installation Guide
- Hang the units: Flush the building water supply line first. Mount the hanger brackets level with 2 anchors each, then hang the cooler on the right and the fountain on the left. Both must rest on their galvanized steel frames, not under the stainless steel basin return edge. For a left-side-high layout, swap the patch plate and waste drains between units.
- Secure the units and drain: Remove the front panels (2 front T15 screws at the base and 2 under the fountain nose). Mark the anchor holes, take the units down to drill the pilot holes, then rehang and anchor them. Install the supplied drain parts, with the sponge tubing on the brass drain pipe, and connect a P-trap to the drain stub-out.
- Connect the water: Connect the supplied copper inlet tube to the shut-off valve. Replace the push-fit plug on the cold tank with the 1/4" union and connect the fountain's insulated 1/4" line to it. Turn on the water, press the push pads until both bubblers run steady, and check for leaks.
- Plumb the bottle filler: Connect the supplied tee and tube so chilled water feeds both the fountain valve and the VersaFiller. Feed the tubing up through the bushing in the top of the lower unit, since the bottle filler mounts above it.
- Mount the bottle filler: Center the rubber gasket on the unit top against the wall, set the wall frame on it, and fasten it to the wall, pulling the tubing up through the frame. Connect the tubing to the solenoid valve inlet on the back of the filler. Feed the power supply terminals and green ground wire through the bushing, connect the terminals, and attach the ground wire to the cooler frame ground. Set the cabinet into the gasket groove, secure it with 4 Torx screws, then install the drip tray and anti-splash grate.
- Power up and test: Spin the condenser fan blade by hand to confirm it's clear, then plug in both power cords. Turn on the water and place a container in the alcove to release trapped air, then check for leaks. Adjust the fountain stream to at least 4" high. Reinstall the front panels and the bottle filler top cap.
Looking for the Oasis PG8EBFSL Refrigerated Bi-Level Fountain?
