Oasis PG8EBF | Refrigerated Fountain w/ Contactless Bottle Filler
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Oasis PG8EBF | Refrigerated Fountain w/ Contactless Bottle Filler
The Oasis PG8EBF Series is a wall-mounted refrigerated fountain with a contactless bottle filler, delivering 8.0 GPH of chilled water.
Key Specifications:
| Finish | Greystone (Standard), Sandstone, Stainless Steel |
| Activation | Contactless sensor on the bottle filler with programmable auto shut off; four push pads on the lower fountain |
| Filtration | Non-Filtered. Optional 041253-001, 041253-005 or 041253-006 Can be Added for Filtered Option |
| Refrigeration | 8.0 GPH Water Chiller Included (R-134a refrigerant) |
| Power | 115 Volts, 60 Hz, 5.0 amps, 500 watts |
Why choose Oasis PG8EBF:
- Chilled Water on Demand: The high efficiency cooling system delivers 8.0 GPH of 50°F drinking water at 90°F ambient and 80°F inlet water.
- Contactless Bottle Filling: The VersaFiller provides sensor activation with laminar flow. Its basin is designed to eliminate splashing and standing water, and a built-in bottle counter tracks use.
- Antimicrobial Protection: Key VersaFiller components contain Freshield, a silver-based antimicrobial compound. The flexible water saver bubbler also contains a silver-based additive and reduces waste water by 50%.
- Durable, Serviceable Build: The stainless steel top and heavy duty galvanized steel frame are paired with removable side and front panels for easy installation access. A built-in 100 micron strainer protects the waterway.
Variant Option:
- PG8EBFGST (507026): Greystone powder coat on galvanized steel, the standard finish, with 8.0 GPH chilled water and a contactless bottle filler.
- PG8EBFSAN (507027): Sandstone powder coated paint finish, with 8.0 GPH chilled water and a contactless bottle filler.
- PG8EBFSTN (507028): Stainless steel finish, with 8.0 GPH chilled water and a contactless bottle filler.
FAQ
Q: Does the Oasis PG8EBF Series Include a Water Filter?
A: No. The unit is non-filtered, but the bottle filler cabinet has ample space for all OASIS filters. Optional VersaFilter III (041253-001), Total PFAS (041253-005) and Pharmaceutical (041253-006) universal retrofit kits can be added.
Q: What Electrical Power Does the Oasis PG8EBF Series Require?
A: The unit runs on 115 Volts, 60 Hz, drawing 5.0 full load amps (500 rated watts). It requires a 115V grounded North American duplex receptacle, not furnished, connected to a 20A minimum GFCI circuit.
Q: What Plumbing Connections Are Needed for Installation?
A: The unit has a 3/8 inch O.D. water inlet with a built-in 100 micron strainer, operating between 20 and 100 PSI. The drain has a 1-1/4 inch O.D. tailpiece. The trap and stop valve are not furnished.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Oasis PG8EBF is a wall-mounted refrigerated fountain with a contactless bottle filler, delivering 8.0 GPH of chilled water to both the fountain and the filler.
Before You Begin
- Tools: Power drill with pilot bit, T15 Torx driver, #2 Phillips and slotted screwdrivers, 1/4" nut driver, bubble level, and tape measure.
- Not included: Wall anchors and fasteners for the hanger bracket, unit, and bottle filler frame, a 1-1/4" P-trap, and a water shut-off valve.
- Plumbing: Provide a 3/8" water supply stub-out and a 1-1/4" IPS drain stub-out. Maximum supply pressure is 100 PSI. Use a regulator if pressure spikes could exceed it.
- Electrical and ventilation: The cooler and the bottle filler each have a power cord, so you need two outlets or a splitter, on a 20A minimum GFCI device. Allow 4" of clearance per side for ventilation.
- Codes and reference: Some states require a licensed plumber. Check local codes for mounting height, and see the installation manual for the rough-in diagram.
Step-by-Step Installation Guide
- Hang the cooler: Flush the building water supply line first. Mount the hanger bracket with 2 anchors, making sure it's level, then hang the unit on it. It must rest on the galvanized steel frame, not under the return edge of the stainless steel basin top.
- Secure the unit: Remove the front panel (2 front T15 screws at the base and 2 under the fountain nose). Mark the 2 lower anchor locations, take the unit down to drill the pilot holes, then rehang it and fasten it with anchors.
- Connect the drain and water: Install a P-trap between the drain stub-out and the basin drainpipe. Connect the supplied copper inlet tube to the shut-off valve, leaving the 1/4" line on the cartridge valve connected. Turn on the water and press the push pads until the stream is steady, then check for leaks.
- Mount the bottle filler frame: Center the rubber gasket on top of the cooler against the wall. Set the wall frame on the gasket, mark the holes, and fasten it to the wall, pulling the plastic tubing up through the frame opening.
- Connect the bottle filler: Slide the sponge insulation over the water line and connect it to the solenoid valve inlet on the back of the bottle filler. Attach the tether to the cleat on the mounting frame. Feed the power supply terminals and green ground wire through the bushing in the cooler top, connect the terminals, and attach the ground wire to the cooler frame ground. Then set the cabinet into the gasket groove and fasten it with 2 Torx screws.
- Power up and test: Spin the condenser fan blade by hand to confirm it's clear, then plug in both power cords. Turn on the water and place a container in the alcove to release trapped air, then check for leaks. Adjust the fountain stream to at least 4" high. Reinstall the front panel and top cap.
Looking for the Oasis PG8EBF Refrigerated Fountain with Contactless Bottle Filler?
