Oasis PG8ACSL | Bi-Level Water Cooler w/ Fountain & 8.0 GPH Chilling
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Oasis PG8ACSL | Bi-Level Water Cooler w/ Fountain & 8.0 GPH Chi...
The Oasis PG8ACSL Series is a wall-mounted bi-level electric water cooler with fountain, delivering 8.0 GPH of chilled water.
Key Specifications:
| Finish | Greystone (GST), Sandstone (SAN), or Stainless Steel (STN, at additional cost) |
| Activation | Manual (mechanical) activation with four push pads per side |
| Filtration | Non-Filtered. Optional VersaFilter III Universal Filter Kit - Pressure, Total PFAS Universal Filter Kit - Pressure, or Pharmaceutical Universal Filter Kit - Pressure Can be Added for Filtered Option |
| Refrigeration | 8.0 GPH of 50°F Water at 90°F Ambient and 80°F Inlet Water (ASHRAE 18), R-134a Refrigerant |
| Power | 115 Volts, 60 Hz |
Why choose Oasis PG8ACSL:
- Chilled Water Performance: Delivers 8.0 GPH of 50°F water per ASHRAE 18 testing, using R-134a refrigerant.
- Bi-Level Design: Pairs a water cooler with a lower non-refrigerated fountain unit, and the universal side access panel and drain pipe allow left high/right low or right high/left low installation.
- Water Saving and Clean Waterways: The flexible one-piece bubbler reduces waste water by 50%, and the 100 micron built-in strainer stops particles before they enter the lead-free waterway.
- Durable Construction: Stainless steel top and heavy duty galvanized steel frame, with removable side and front panels for easy access.
Variant Option:
- PG8ACSLGST (506232): Greystone powder coated paint on galvanized steel, with 8.0 GPH chilled water and a bi-level fountain.
- PG8ACSLSAN (504327): Sandstone powder coated paint finish, with 8.0 GPH chilled water and a bi-level fountain.
- PG8ACSLSTN (504328): Stainless steel finish (at additional cost), with 8.0 GPH chilled water and a bi-level fountain.
FAQ
Q: Can the Oasis PG8ACSL Series Be Fitted with a Filter?
A: Filtration is not included, but it can be added. Compatible options at additional cost are the VersaFilter III Universal Filter Kit - Pressure, the Total PFAS Universal Filter Kit - Pressure, and the Pharmaceutical Universal Filter Kit - Pressure.
Q: What Water Pressure Does the Bubbler Require?
A: The water saver bubbler operates between 20 and 100 PSI. A 100 micron built-in strainer stops particles before they enter the waterway.
Q: What Is Needed for Installation?
A: The unit is wall mounted for indoor use and ships with complete instructions and a wall mounting bracket. A trap, stop valve and electrical outlet are not furnished, and 4 inches of minimum clearance per side is required for ventilation. Check local, state and federal codes for proper mounting height before rough-in.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Oasis PG8ACSL is a wall-mounted bi-level electric water cooler with a non-refrigerated fountain, delivering 8.0 GPH of chilled water. It can be installed with the cooler on the right (standard) or the left (alternate).
Before You Begin
- Tools: Power drill with pilot bit, T15 Torx driver, slotted screwdriver, bubble level, tape measure, and a tool for cutting plastic pipe.
- Not included: Wall anchors (8 per unit), 1-1/4" P-trap, and a water shut-off valve.
- Plumbing: Provide a 3/8" water supply stub-out and a 1-1/4" IPS drain stub-out. Maximum supply pressure is 100 PSI. Use a regulator if pressure spikes could exceed it.
- Electrical and ventilation: A 20A minimum GFCI-protected outlet is required. Allow 4" minimum clearance per side for ventilation.
- Codes and reference: Some states require a licensed plumber. Check local codes for mounting height, and see the installation manual for rough-in dimensions.
Step-by-Step Installation Guide
- Prepare the site: Flush the building water supply line before installing. The cooler must always be on the right side for proper airflow. For a left-side-high layout, follow the alternate rough-in diagram and swap the patch plate and waste drains between units.
- Install the hanger brackets: Mount the brackets on the wall with 2 anchors each, making sure both are level, then hang the units on them. Hang each unit on the galvanized steel frame, not under the stainless steel basin's return edge.
- Secure the units: Remove the front panels (T15 screws), mark the mounting holes, then take the units down to drill pilot holes. Rehang and fasten with wall anchors.
- Connect the drain: Install the included drain components, with the insulation sponge tubing on the brass drain pipe. Connect a P-trap to the drain stub-out and basin drainpipes, cutting the pipe to fit if needed.
- Connect the water supply: Attach the copper inlet tube to the shut-off valve and join it to the union fitting. Replace the push-fit plug on the cold tank with the 1/4" union fitting and connect the fountain line to it. Turn on the water and run both bubblers until the stream is steady, checking for leaks.
- Adjust, power, and finish: Turn the adjustment knob under the fountain nose until the stream is at least 4" high. Spin the condenser fan by hand to confirm it's clear, then plug in the unit. Reinstall the front panels once everything is working.
Looking for the Oasis PG8ACSL Bi-Level Water Cooler?
