Oasis PG8AC | Refrigerated Drinking Fountain w/ 8.0 GPH Chiller & Push Pads
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Oasis PG8AC | Refrigerated Drinking Fountain w/ 8.0 GPH Chiller &am...
Oasis PG8AC Series is a wall-mounted refrigerated drinking fountain delivering 8.0 GPH of chilled water with four push pads.
Key Specifications:
| Finish | Greystone, Sandstone, or Stainless Steel |
| Activation | Manual, mechanical activation with four push pads |
| Filtration | Non-Filtered. Optional 041253-001, 041253-005, or 041253-006 Can be Added for Filtered Option |
| Refrigeration | 8.0 GPH of 50°F Water Chiller Included (R-134a Refrigerant) |
| Power | 115 Volts, 60 Hz, 5.0 Full Load Amps, 500 Rated Watts |
Why choose Oasis PG8AC:
- Reliable Chilled Water: A high efficiency cooling system with R-134a refrigerant delivers 8.0 GPH of 50°F drinking water, with external access to the thermostat and stream height adjustment.
- Durable Construction: A stainless steel top and heavy duty galvanized steel frame, with lead-free waterways, support long-term indoor use.
- Water-Saving, Hygienic Design: A flexible one-piece bubbler with a silver-based antimicrobial additive reduces waste water by 50%, and a built-in 100 micron strainer stops particles before they enter the waterway.
- Easy Installation and Upgrades: The unit ships with a wall mounting bracket and removable side and front panels for easy access, and universal retrofit filter kits can be added.
Variant Option:
- PG8ACGST (504571): Greystone powder coat finish on galvanized steel with 8.0 GPH chilled water output.
- PG8ACSAN (504323): Sandstone powder coated paint finish with 8.0 GPH chilled water output.
- PG8ACSTN (504324): Stainless steel finish with 8.0 GPH chilled water output.
FAQ
Q: Does the Oasis PG8AC Come with a Water Filter?
A: No, the unit is non-filtered as standard. Filtration can be added with the optional universal retrofit kits: VersaFilter III (041253-001), Total PFAS (041253-005), or Pharmaceutical (041253-006).
Q: What Water Supply and Drain Connections Are Required?
A: The unit uses a 3/8 in O.D. water inlet with strainer, operating between 20 and 100 PSI. It has a 1-1/4 in IPS waste with a 1-1/4 in O.D. tailpiece. The trap, stop valve, and electrical outlet are not furnished.
Q: What Clearance Is Needed for Ventilation?
A: Allow a minimum of 4 inches per side for proper ventilation. The unit runs on 115 Volts, 60 Hz, so a nearby electrical outlet is required.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Oasis PG8AC is a wall-mounted refrigerated drinking fountain with four push pads, delivering 8.0 GPH of chilled water.
Before You Begin
- Tools: Power drill with pilot bit, T15 Torx driver, slotted screwdriver, bubble level, tape measure, and a tool for cutting plastic pipe.
- Not included: 4 wall anchors, a 1-1/4" P-trap, and a water shut-off valve.
- Plumbing: Provide a 3/8" water supply stub-out and a 1-1/4" IPS drain stub-out. Maximum supply pressure is 100 PSI. Use a regulator if pressure spikes could exceed it.
- Electrical and ventilation: A 20A minimum GFCI-protected outlet is required. Allow 4" of clearance per side for ventilation.
- Codes and reference: Some states require a licensed plumber. Check local codes for mounting height, and see the installation manual for the rough-in diagram.
Step-by-Step Installation Guide
- Install the hanger bracket: Flush the building water supply line first. Then mount the hanger bracket on the wall with 2 anchors, making sure it's level.
- Hang the unit: Hang the fountain on the bracket. Make sure it rests on the galvanized steel frame, not under the return edge of the stainless steel basin top.
- Secure the unit: Remove the front panel (2 front T15 screws at the base and 2 under the fountain nose). Mark the 2 lower anchor locations, take the unit down to drill the pilot holes, then rehang it and fasten it with anchors.
- Connect the drain: Install a P-trap between the drain stub-out and the basin drainpipe, cutting the drainpipe to fit if needed.
- Connect the water supply: Connect the supplied copper inlet tube to the shut-off valve, and leave the 1/4" line on the cartridge valve connected. Turn on the water and press the push pads until the bubbler gives a steady stream. Check for leaks, and adjust the stream height to at least 4" with the knob beneath the fountain nose.
- Power up and finish: Spin the condenser fan blade by hand to confirm it's clear, then plug in the unit. Once everything runs without leaks, reinstall the front panel.
Looking for the Oasis PG8AC Refrigerated Drinking Fountain?
