Oasis PFCP10EBF | Freestanding Refrigerated Bottle Filler w/ Filter Options
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Oasis PFCP10EBF | Freestanding Refrigerated Bottle Filler w/ Filter...
The Oasis PFCP10EBF Series is a freestanding refrigerated contactless bottle filler delivering chilled, filtered water at 1.1 GPM.
Key Specifications:
| Finish | Stainless Steel Cabinet and Bottle Filler Alcove |
| Activation | Contactless Sensor on Bottle Filler with Programmable Auto Shut Off |
| Filtration |
507199: VersaFilter III, lead, Particulate Class I, chlorine, taste, odor and microplastics reduction to 4,750 Gal.
507523: Total PFAS, lead, cysts, chlorine, taste, odor, Particulate Class I and microplastics reduction to 1,100 Gal. 507524: Pharmaceutical and contaminant reduction filter (including Atenolol, Bisphenol A, Ibuprofen, Naproxen and DEET), plus lead, cysts, chlorine, taste, odor and microplastics reduction to 725 Gal. |
| Refrigeration | 10.0 GPH of 50°F Water Chiller Included (R-134a Refrigerant) |
| Power | 115 Volts, 60 Hz, 5.0 Full Load Amps, 500 Rated Watts. Power Supply Cord Included. |
Why choose Oasis PFCP10EBF:
- Chilled Water On Demand: A high-efficiency tank-type evaporator with an adjustable thermostat delivers 10.0 GPH of 50°F drinking water.
- Fast, Touch-Free Filling: The contactless sensor, 1.1 GPM laminar flow and programmable auto shut off keep bottle filling quick and hygienic.
- Low-Maintenance Operation: The built-in drain means no drip tray to empty, a 100 micron strainer protects the waterway, and a filter monitor and bottle counter track usage.
- Antimicrobial and Lead-Free Design: Freshield silver-based antimicrobial protection on key components and lead-free waterways support cleaner, safer dispensing.
Variant Option:
- PFCP10EBF (507199): Equipped with the VersaFilter III, certified to NSF/ANSI 42, 53, 372 and 401 for lead, Particulate Class I, chlorine, taste, odor and microplastics reduction to 4,750 gallons.
- PFCP10EBF (507523): Equipped with the Total PFAS filter, certified to NSF/ANSI 42, 53 and 401 for chlorine, taste, odor, particulate class 1, lead, cysts, Total PFAS and microplastics reduction to 1,100 gallons.
- PFCP10EBF (507524): Equipped with the pharmaceutical and contaminant reduction filter, certified to NSF/ANSI 42, 53 and 401 for chlorine, taste, odor, particulate class 1, lead, cysts, select pharmaceutical contaminants and microplastics reduction to 725 gallons.
FAQ
Q: Where Is the Filter Located and How Is It Replaced?
A: The filter is mounted inside the cabinet. The removable front panel gives easy access for filter changeout, and the built-in filter monitor helps track when a replacement is due. The OASIS VersaFilter III Replacement Cartridge (Item #041145-001) is available as an optional accessory.
Q: What Plumbing and Electrical Connections Are Required?
A: The unit uses a 1/4" I.D. quick connect water inlet and a 1-1/2" P-trap waste connection. It runs on 115 Volts, 60 Hz and includes a power supply cord. Allow 4" (102 mm) of ventilation clearance at the rear, and at the sides if installed in an alcove or near a corner.
Q: Is This Bottle Filler Suitable for Outdoor Use?
A: No. It is designed for indoor, freestanding installation.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Oasis PFCP10EBF is a freestanding refrigerated bottle filler with a contactless sensor and built-in filtration, delivering 10.0 GPH of chilled water for indoor use.
Before You Begin
- Tools and parts: A T15 Torx driver. The drain pipes, elbows, P-trap, and stabilizer bracket are included. Wall anchors, the 1/4" O.D. supply tube, and the drain elbow coupling are not.
- Plumbing: Provide a 1/4" O.D. water supply at 45 to 100 PSI and a connection to the building drain for the 1-1/2" O.D. drainpipe.
- Electrical: A 115V outlet on a 20A minimum GFCI device is required, and the unit must be grounded. Check the data plate to confirm the voltage.
- Clearance and reference: Allow 4" of clearance at the rear, and at the sides if installed in an alcove or corner. See the installation manual for the dimensional drawing and electronics setup.
Step-by-Step Installation Guide
- Unpack the unit: Carefully unpack the filler and remove the front panel by taking out the 2 T15 screws at the bottom. Take out the drainpipes, drain elbows, and P-trap packed inside. The filter is also packed inside the cabinet for shipping.
- Assemble and connect the drain: Connect the drainpipes, elbows, and P-trap to the drip tray tailpiece, and feed the 1-1/2" O.D. P-trap through the snap bushing at the back of the cabinet. Attach the drainpipe to an elbow coupling (not included) and connect it to the building drain.
- Install the filter: Unpack the filter and remove its sanitary cap. Orient it with the rectangular lug on top facing forward, push it up into the filter housing, and turn it a quarter turn to the right until it stops.
- Connect the water supply: Flush the building supply line first. Push the 1/4" O.D. supply tube through the collet of the quick-connect fitting on the back of the unit until it seats firmly at the bottom of the fitting. Cut the tube square, and don't deform it or leave marks on it.
- Secure and power the unit: Fasten the stabilizer bracket to the unit with the supplied screws, then anchor it to the wall. Spin the fan blade by hand to confirm it's clear, then plug into the GFCI outlet.
- Flush, test, and finish: Place a container in the alcove. Water flow is delayed until the filter fills, then flush until the water runs clear. Check for leaks, then repeat with a bottle 2 or 3 times to purge air until the stream is steady. Reinstall the front panel with its 2 screws.
Looking for the Oasis PFCP10EBF Freestanding Refrigerated Bottle Filler?
