Oasis MMRSLEBF | In-Wall Bi-Level Fountain w/ Contactless Bottle Filler
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Oasis MMRSLEBF | In-Wall Bi-Level Fountain w/ Contactless Bottle Fi...
Oasis MMRSLEBF (507193) Series: in-wall bi-level fountain with contactless Aqua Pointe bottle filler, non-refrigerated.
Key Specifications:
| Finish | Brushed Stainless Steel Cabinet, Alcove and Wrapper |
| Activation | Contactless Sensor on Bottle Filler; Manual Activation on Fountains with Two Vandal-Resistant Push Buttons |
| Filtration | Non-Filtered. Optional Universal Retrofit Kits (Item #041253-001, #041253-005, #041253-006) Can be Added for Filtered Option |
| Refrigeration | Not Included. Non-Refrigerated Unit Delivers Ambient Water |
| Power | 115 Volts, 60 Hz, 0.2 Full Load Amps, 11 Rated Watts. Requires a Grounded Duplex Receptacle and a 20A Minimum GFCI Device |
Why choose Oasis MMRSLEBF:
- Dual Hydration Options: Combines two bi-level drinking fountains with an Aqua Pointe electronic bottle filler for drinking and bottle filling in one unit.
- Touch-Free Bottle Filling: The contactless sensor, laminar flow and programmable 20-second auto shut-off make filling bottles clean and controlled.
- Built-In Monitoring and Protection: A built-in filter monitor and bottle counter, a 100 micron strainer and Freshield antimicrobial protection on key bottle filler components support reliable use.
- Durable In-Wall Design: A recessed heavy duty galvanized steel frame, brushed stainless steel finish, vandal-resistant push buttons and an LED lighted alcove suit indoor installations.
FAQ
Q: Is the Oasis MMRSLEBF Refrigerated?
A: No. The MMRSLEBF is non-refrigerated and delivers ambient water from both the fountains and the bottle filler.
Q: Can Filtration Be Added to the MMRSLEBF?
A: Yes. The unit ships without filtration, but it can be fitted with Oasis universal retrofit kits. The options are the VersaFilter III (Item #041253-001), the Total PFAS kit (Item #041253-005) and the Pharmaceutical kit (Item #041253-006).
Q: What Do I Need to Know Before Installing the MMRSLEBF?
A: The unit mounts in the wall using the included recessed frame. It needs a 3/8 in O.D. water inlet and a 1-1/2 in or 1-1/4 in IPS waste stub out. A short radius trap is required, and the stop valve, trap and pipe connector are not provided. It also needs a 115V grounded duplex receptacle connected to a 20A minimum GFCI device.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Oasis MMRSLEBF is a non-refrigerated, in-wall bi-level fountain with a contactless Aqua Pointe bottle filler, delivering ambient water from both the fountains and the filler.
Before You Begin
- Plumbing: Provide a 3/8" O.D. water supply and a 1-1/2" or 1-1/4" IPS waste stub-out. Maximum supply pressure is 100 PSI. The stop valve, short radius trap, pipe connectors, and 3/8" compression fittings are not included.
- Electrical: A 115V grounded duplex receptacle on a 20A minimum GFCI device is required. Flexible conduit is recommended, and voltage must match the unit's data plate.
- Wall opening: The unit mounts in the recessed frame supplied with it. Prepare the wall opening and rough-in per the manual's roughing-in drawing.
- Codes and reference: Some states require a licensed plumber. See the installation manual for rough-in details and sensor adjustment.
Step-by-Step Installation Guide
- Set the frame: Insert the frame assembly into the wall opening and secure it to the studs. The front flange must sit flush with the finished wall surface.
- Prepare the upper panel: Install the waste tee on the bottle filler tailpiece and attach the fountain mounting plate to the frame. Feed the remote toggle button through the plate, attach the green ground wire, and plug in the sensor cord. Then fasten the upper panel with 2 screws.
- Prepare the fountains: Remove the bottom plates from the fountain arms and save the screws. Snap the reveal gaskets onto the arms and fit compression connectors on the waste tubes, sliding them back out of the way.
- Hang the fountains: Hang the upper fountain first, feeding its waste tube into the waste stub as you go. Then hang the lower one. Tighten both to the mounting plates with the supplied nuts, bolts, and washers.
- Connect the plumbing: Tighten the waste connections, then connect the 3/8" water supply with a compression fitting. Link the upper fountain's inlet with the supplied water tube assembly, then connect the lower fountain's inlet.
- Test and finish: Turn on the water, check for leaks, and run the bubblers until the air is purged and the taste is satisfactory. Adjust the regulator for stream height and test the sensor. Fasten the bottom panels, slide the gaskets into place, and refit the fountain bottom plates.
Looking for the Oasis MMRSLEBF In-Wall Bi-Level Fountain?
