Oasis M8CREBF | Refrigerated Bi-Level Fountain w/ Contactless Bottle Filler
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Oasis M8CREBF | Refrigerated Bi-Level Fountain w/ Contactless Bottl...
The Oasis M8CREBF (507172) is an in-wall refrigerated bi-level fountain with a contactless AquaPointe bottle filler.
Key Specifications:
| Finish | Stainless Steel (M8CREBFSTN) alcove and cabinet |
| Activation | Contactless sensor on the bottle filler with programmable auto shut-off; two vandal-resistant push buttons on the fountains |
| Filtration | Non-Filtered. Optional OASIS VersaFilter III Universal Retrofit Kit (041253-001), Total PFAS Universal Retrofit Kit (041253-005) or Pharmaceutical Universal Retrofit Kit (041253-006) Can be Added for Filtered Option |
| Refrigeration | 8.0 GPH of 50°F Water Chiller Included (R-134a refrigerant, high efficiency cooling system) |
| Power | 115 Volts, 60 Hz, 5.5 full load amps, 550 rated watts. Fountains remain available during power outages. |
Why choose Oasis M8CREBF:
- Chilled Hydration: The high efficiency cooling system delivers 8.0 gph of 50°F water, so chilled water is available for both drinking and bottle filling.
- Contactless Bottle Filling: The AquaPointe electronic bottle filler uses contactless activation and laminar flow to reduce splashing and standing water. A built-in filter monitor and bottle counter help track usage.
- Antimicrobial Protection: Key bottle filler components contain Freshield, and the one-piece water saver bubbler is infused with a silver-based antimicrobial additive.
- Durable In-Wall Design: A heavy duty galvanized steel frame, a stainless steel cabinet and a 100 micron built-in strainer suit high-traffic indoor facilities.
FAQ
Q: Does the Oasis M8CREBF Include a Water Filter?
A: No. The unit is non-filtered as standard, but filtration can be added with the optional OASIS VersaFilter III (041253-001), Total PFAS (041253-005) or Pharmaceutical (041253-006) Universal Retrofit Kits.
Q: Will the Fountains Work During a Power Outage?
A: Yes. The bi-level fountains are manually activated with push buttons and use a low flow one-piece bubbler, so water stays available during power outages. The contactless bottle filler and chiller need electrical power.
Q: What Plumbing and Wall Requirements Apply for Installation?
A: The unit needs a water supply, a drain and a 45" x 38-3/4" wall opening. The recessed mounting frame is included and is 3-1/2" deep, with extra depth needed for the water and waste lines. It uses 3/8" O.D. water inlets and a 1-1/2" or 1-1/4" IPS waste stub out. A short radius trap is required, and the stop valve, trap and pipe connector are not provided.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Oasis M8CREBF is an in-wall refrigerated bi-level fountain with a contactless bottle filler, delivering 8.0 GPH of 50°F chilled water.
Before You Begin
- Wall opening: Prepare a 45" x 38-3/4" opening with at least 3-1/2" of depth for the recessed frame, plus extra depth for the water and waste lines.
- Plumbing: Provide a 3/8" O.D. water supply and a 1-1/2" or 1-1/4" IPS waste stub-out. Maximum supply pressure is 100 PSI. The stop valve, short radius trap, and pipe connectors are not included.
- Electrical: A 20A minimum GFCI-protected supply is required, and flexible conduit is recommended. Voltage must match the unit's data plate.
- Codes and reference: Some states require a licensed plumber. See the installation manual for the rough-in drawing and sensor adjustment instructions.
Step-by-Step Installation Guide
- Set the frame: Insert the frame assembly into the wall opening and secure it to the studs. The front flange must sit flush with the finished wall surface.
- Install the cooling unit: Attach the cradle mounting angles to the cradle with 4 screws, slide the cradle into the frame, and secure it with 4 screws. The cradle's bottom flange goes behind the frame's front flange. Slide the cooling unit onto the cradle and run power to it.
- Mount the upper panel: Install the waste tee on the bottle filler tailpiece and attach the fountain mounting plate to the frame. Feed the remote toggle button through the plate, attach the green ground wire, and plug in the sensor cord. Then fasten the upper panel with 2 screws.
- Hang the fountains: Remove the fountain arms' bottom plates, snap on the reveal gaskets, and fit compression connectors on the waste tubes. Hang the upper fountain first, feeding the waste tube into the waste stub, then hang the lower one. Tighten both with the supplied nuts, bolts, and washers.
- Connect the plumbing: Tighten the waste connections, then connect the 3/8" water supply with a compression fitting. Link the chiller tube with its tee to the upper fountain, and run the long connecting tube from the tee to the lower fountain.
- Test and finish: Turn on the water, check for leaks, and run the bubblers until the air is purged and the taste is satisfactory. Adjust the regulator for stream height and test the sensor. Fasten the bottom panels, slide the gaskets into place, and refit the fountain bottom plates.
Looking for the Oasis M8CREBF Refrigerated Bi-Level Fountain?
