Everpure EV910007 | IN-12 In-Line Water Filter for Coffee & Espresso | 6-Pack
Everpure EV910007 | IN-12 In-Line Water Filter for Coffee & Espresso | 6-Pack is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Everpure EV910007 | IN-12 In-Line Water Filter for Coffee & Esp...
The Everpure EV910007 (IN-12) is a granular activated carbon in-line water filter with scale inhibition that reduces chlorine taste and odor, ideal for medium-volume coffee, espresso, and ice equipment in cafes, restaurants, and offices.
Key Specifications:
| Compatibility | Medium-volume single-pot coffee brewers |
| Capacity | 4,800 gallons (18,170 L) |
| Contaminants Filtered | Chlorine taste, odor, scale |
| Operating Conditions | 35-100°F, 10-125 PSI |
| Number of Filters | 6-Pack |
Why Choose the Everpure EV910007 (IN-12)?
- Improved Taste: The Everpure EV910007 (IN-12) reduces chlorine taste and odor for fresher-tasting coffee, espresso, and ice.
- Equipment Protection: Scale inhibition helps extend the life of brewing equipment by preventing limescale buildup.
- Space-Saving Design: The compact in-line design installs out of sight behind equipment for a clean setup.
- Reliable Performance: NSF/ANSI 42 certification ensures consistent, quality-tested filtration results.
How to Replace Everpure EV910007 (IN-12):
- Shut off the water supply before removing the old cartridge.
- Disconnect the 1/4" fittings and remove the spent filter.
- Install the new Everpure EV910007 (IN-12) cartridge, ensuring proper inlet and outlet orientation.
- Flush the new cartridge by running water through it for three minutes at full flow.
- Turn the water supply back on and check for leaks.
Notice: For detailed, step-by-step guidance, please refer to the guide here.
FAQ
Q: How Often Should the Everpure EV910007 (IN-12) Filter Be Replaced?
A: The filter should be replaced after reaching its rated capacity of 4,800 gallons or every six months, whichever comes first, as part of a routine preventative maintenance program.
Q: How Can I Maximize the Pentair EV910007's Lifespan?
A: Follow the recommended operating conditions, log each replacement date, and avoid running unsafe or unknown-quality water through the system without adequate disinfection before or after the cartridge.
Q: What Contaminants Does Everpure EV910007 (IN-12) Filter Remove?
A: The Pentair EV910007 reduces chlorine taste and odor while inhibiting scale formation that can affect equipment performance.
Q: What Certifications Does This Filter Have?
A: The Everpure EV910007 (IN-12) is NSF/ANSI Standard 42 certified for taste and odor reduction.
Q: Is This a Genuine Filter? Is BottleFillingStations.com an Authorized Everpure Distributor?
A: Yes, this is a genuine Everpure EV910007 (IN-12) filter so it will perform per manufacturer's standards and come included with a warranty. BottleFillingStations.com is an authorized Everpure distributor.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
The Everpure EV910007 (IN-12, 6 Pack) is a high-capacity 12" inline granular activated carbon filter with scale control for medium-volume coffee brewers, ice makers, and other foodservice equipment. The Pentair EV910007 reduces chlorine taste and odor and particulates while inhibiting limescale buildup to help protect your equipment.
Step-by-Step Replacement Guide
- Shut off the water supply to the filter and relieve pressure by opening a nearby faucet or the equipment's dispense valve until flow stops. Place a bucket and towel under the filter to catch residual water.
- Disconnect the 1/4" inlet and outlet water lines from the old IN-12 filter, then remove the used filter from its mounting position behind the equipment.
- Inspect the water lines and fittings for wear, kinks, or debris, and trim or replace any damaged tubing as needed to ensure a proper seal.
- Wrap the threads of your 1/4" fittings with PTFE tape and connect the new IN-12 filter, attaching the supply line to the inlet and the line to your equipment to the outlet, with the filter in the correct flow direction.
- Turn the water supply back on slowly and check both connections closely for leaks.
- Flush the filter at full flow for 3 minutes before returning the system to service, then note the install date so it can be replaced in 6 months.
Looking for a genuine Everpure EV910007 (Pentair EV910007) IN-12 filter? Shop here.
