Everpure 160-52120 | QTPT-1 Filtration System | Chlorine, Sediment
Everpure 160-52120 | QTPT-1 Filtration System | Chlorine, Sediment is backordered and will ship as soon as it is back in stock.
Shipping
Shipping
🚚✨ Free Shipping in the Continental U.S.
All Products. No Minimums.
Estimated Shipping Times:
Important Note on Delivery Times
All shipping estimates provided are approximate only. While we always strive to meet or exceed your delivery expectations, we cannot guarantee the exact delivery times listed.
For time-sensitive orders, please contact us directly so we can provide a more accurate lead time estimate based on your specific requirements.
Same Day Shipping
All in stock orders received before 3PM EST will ship the same day. Orders received after 3PM EST will ship the following business day.
Water Filters, Hand Dryers, & Indoor Bottle Fillers are our most popular in stock items.
Outdoor Tubular Drinking Fountains
Evergreen normally ships in 5-15 days. Black, Gray and Blue ship in 2-4 weeks.
Ice Machines
In stock units ship within 48 hours. Other units normally ship in 2-4 weeks.
Other
Orders that ship directly from a manufacturer normally have a firm shipping estimate but those dates are subject to change due to manufacturer production, inventory or shipping. We do our best to estimate ship dates but orders shipping directly from the manufacturer can have unexpected delays. We will confirm tracking information when orders ship directly from a manufacturer but may not have updates or estimates beyond the original estimate. Once your order is placed with the manufacturer, it may not be able to be cancelled even if it hasn't shipped yet.
Please contact support@bottlefillingstations.com to confirm delivery time for a specific product or quantity. Or to inquire about an existing order.
Special Case Shipping Rates
Please note that shipping rates are subject to change at any time. We reserve the right to charge an additional fee in addition to the regularly advertised shipping fee for shipping to remote areas not easily accessible by typical freight carrier means (i.e. islands only accessible by ferry). If your order falls into this category, you will be notified upon receipt of your order, and have the option to complete the purchase with additional fee or to cancel the order. Please note, these instances are very rare, as most locations are reachable by regular freight. If you have any questions, please contact us!
Key Terms & Conditions
Exceptions may apply to islands and other remote territories.
All orders shipped by the carrier of our choice.
Everpure 160-52120 | QTPT-1 Filtration System | Chlorine, Sediment
The Everpure 160-52120 (QTPT-1) is a Qwik-Twist sediment and activated carbon filtration system that reduces chlorine, taste, odor, and sediment, ideal for foodservice beverage and RO tank applications.
Key Specifications:
| Application | Foodservice beverage and RO storage tanks |
| Capacity | 22,500 gallons or 6 months |
| Contaminants Filtered | Chlorine, sediment (2 micron), taste, odor |
| Operating Conditions | 35–100°F; 10–125 psi |
| Included Filter Cartridge | CTO-Q (300-05830) |
Why Choose the Everpure 160-52120 (QTPT-1)?
- Equipment Protection: High-capacity activated carbon filtration helps protect beverage equipment against corrosive chlorine, and gradient-density sediment filtration reduces particles as small as 2 microns, which makes Pentair 160-52120 a dependable pretreatment choice.*
- Better Tasting Beverages: Reduces taste and odor caused by plastic or rubber materials commonly used with RO water storage tanks.*
- Quick, Sanitary Changeouts: Qwik-Twist cartridges and a full-flow inlet shut-off valve make filter replacement fast, easy, and sanitary.
- Simple Installation: A sturdy mounting bracket, 3/8" PTC or 1/2" hose barb connections, and no electrical requirement make Pentair 160-52120 straightforward to install.
*As tested by Pentair.
Comparison Table
| SKU | Model | Flow Rate | Capacity | Contaminants Filtered |
|---|---|---|---|---|
| 160-52120 | QTPT-1 | 2.25 GPM | 22,500 gal | Chlorine, Taste, Odor, Sediment |
| 160-52085 | QTPTCR10 | 0.5 GPM | 4,000 gal | Not specified |
| 160-52131 | QTCR-1 | 1.7 GPM | 10,000 gal | Chloramine Reduction |
| 170-52080 | QT1+CR | 2.5 GPM | 20,000 gal | Chloramine Reduction (Dual Cartridge) |
FAQ
Q: How Often Should the Everpure 160-52120 (QTPT-1) Filter Be Replaced?
A: Replace the CTO-Q cartridge every six months as part of a regular preventative maintenance program. Replace it sooner if the rated capacity of 22,500 gallons is reached or if flow becomes too slow. Always flush the cartridge at installation and after each cartridge change.
Q: What Contaminants Does the Filter Remove?
A: The Pentair 160-52120 system uses high-capacity activated carbon to reduce chlorine, along with taste and odor caused by plastic or rubber materials commonly used with RO water storage tanks. Its gradient-density sediment filtration reduces sediment as small as 2 microns, as tested by Pentair.
Q: What Certifications Does Everpure 160-52120 (QTPT-1) Filter Have?
A: The CTO-Q cartridge is tested and certified by NSF International against NSF/ANSI Standard 42 for material requirements only. The QTPT-1 system itself is not performance tested or certified by NSF.
Q: What Are the Operating Conditions for the Filter?
A: The system operates at water temperatures of 35–100°F (2–38°C) and pressures of 10–125 psi (0.7–8.6 bar), non-shock. The feed-water connection must be cold water only. The maximum service flow rate is 2.25 gpm (8.5 Lpm). Allow 3" of clearance below the system for cartridge removal.
Q: Is This a Genuine Filter? Is BottleFillingStations.com an Authorized Everpure Distributor?
A: Yes, this is a genuine Everpure 160-52120 (QTPT-1) filter so it will perform per manufacturer's standards and come included with a warranty. BottleFillingStations.com is an authorized Everpure distributor.
NOTICE: Do not use with water that is unsafe or of unknown quality without adequate disinfection either before or after the system.
"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us
Always consult with a licensed professional and check local codes before installation. For further details, check the Owners Manual.
Contact us at support@bottlefillingstations.com with any questions.
