Welcome to BottleFillingStations.com!

New collections added for Hand Dryers, Sanitizers, Ice Makers, and more!

FREE SHIPPING

for all orders in the Continental U.S. Limited time only!!

Elkay  |  SKU: EZWS-ERPB8-RF

Elkay EZWS-ERPB8-RF | In-wall Retrofit Bottle Filling Station | Filterless, Refrigerated, For use with SwirlFlo fountains, Stainless Steel

$ 2,226.85
Shipping calculated at checkout.


In Stock
Free Shipping

Product Care Information

Installation


  • Elkay & Halsey Taylor Bottle Filling Stations require installation from a licensed plumber. Email us at support@bottlefillingstations.com, and we can see if our network of service professionals cover your area.
  • Requires access to electrical connection.
  • Product also includes physical copy of installation instructions in package.

ezH2O Installation Video:


Maintenance


It is recommended to routinely clean your Bottle Filling Station with a soft cloth and mild dishwashing soap to spray and wipe down the unit.  It is also recommended to clean the flexible fill mat.  Remove the four screws to wipe beneath and on top of the mat.

ezH2O Maintenance Video:


Filter Replacement


When filter status light turns to red, the filter needs to be changed.  Here are some detailed instructions.

ezH20 Filter Change Video:

Requires a minimum of 12" of wall depth for installation. 

Do you have an existing refrigerated Bi-Level SwirlFlo®? If so, the Elkay EZWS-ERPB8-RF Retrofit is a great option to transform your drinking fountain into a Bottle Filling Station.   

We advise that NON-CHILLED fountains less than 10 years old are suitable for a retrofit. We advise that CHILLED fountains less than 5 years are suitable for a retrofit. Not sure how old your model is?  We can find out for you. Email support@bottlefillingstations.com with your existing fountain’s serial #, which you can find at the bottom of your fountain. Please note existing fountain(s) must have been installed per spec.

  • NOTE: Utilizes existing single fountain, right mounting frame and water chiller.
  • ADA compliant design
  • Quick fill rate of 1.1 Gallons Per Minute  
  • Green Ticker™ tracks number of plastic bottles saved from waste.

 

FAQ

Q: How long does it take to install this retrofit?  

A: Depending on factors such as existing mounting, electrical access, and drainage, installation typically falls between 2-5 hours.  

Q: Does this retrofit come with a chiller? 

A: No. However, the retrofit will utilize the compressor from your existing fountain (if applicable).  

Q: Where is the filter status and bottle counter button located on this retrofit? 

A: If properly installed, the programming button should be located in the pushbar of the previously existing fountain.   

 

EZWS-ERPB8-RF Includes:

  • Integral Bottle Filling Station
  • Mounting Frame
  • Panels

 

*ASSEMBLED IN THE UNITED STATES.  

Experience the benefits of the very popular Elkay EZWS-ERPB8-RF Water Bottle Filling Station. Best Support, Fast Shipping, & Low Prices. CONTACT US NOW!

Elkay EZWS-ERPB8-RF  | In-wall Retrofit Bottle Filling Station | Filterless, Refrigerated, For use with SwirlFlo fountains, Stainless Steel - BottleFillingStations.com
Elkay

Elkay EZWS-ERPB8-RF | In-wall Retrofit Bottle Filling Station | Filterless, Refrigerated, For use with SwirlFlo fountains, Stainless Steel

$ 2,226.85

Requires a minimum of 12" of wall depth for installation. 

Do you have an existing refrigerated Bi-Level SwirlFlo®? If so, the Elkay EZWS-ERPB8-RF Retrofit is a great option to transform your drinking fountain into a Bottle Filling Station.   

We advise that NON-CHILLED fountains less than 10 years old are suitable for a retrofit. We advise that CHILLED fountains less than 5 years are suitable for a retrofit. Not sure how old your model is?  We can find out for you. Email support@bottlefillingstations.com with your existing fountain’s serial #, which you can find at the bottom of your fountain. Please note existing fountain(s) must have been installed per spec.

 

FAQ

Q: How long does it take to install this retrofit?  

A: Depending on factors such as existing mounting, electrical access, and drainage, installation typically falls between 2-5 hours.  

Q: Does this retrofit come with a chiller? 

A: No. However, the retrofit will utilize the compressor from your existing fountain (if applicable).  

Q: Where is the filter status and bottle counter button located on this retrofit? 

A: If properly installed, the programming button should be located in the pushbar of the previously existing fountain.   

 

EZWS-ERPB8-RF Includes:

 

*ASSEMBLED IN THE UNITED STATES.  

Experience the benefits of the very popular Elkay EZWS-ERPB8-RF Water Bottle Filling Station. Best Support, Fast Shipping, & Low Prices. CONTACT US NOW!

View product
In Stock
Free Shipping