Welcome to BottleFillingStations.com!

New collections added for Hand Dryers, Sanitizers, Ice Makers, and more!

FREE SHIPPING

for all orders in the Continental U.S. Limited time only!!

Elkay  |  SKU: EZWSRK

Elkay EZWSRK | Retrofit Bottle Filler Kit For use with EZ-style fountains | Filterless, Stainless Steel

$ 750.00
Shipping calculated at checkout.


In Stock
Free Shipping

Product Care Information

Installation


  • Elkay & Halsey Taylor Bottle Filling Stations require installation from a licensed plumber. Email us at support@bottlefillingstations.com, and we can see if our network of service professionals cover your area.
  • Requires access to electrical connection.
  • Product also includes physical copy of installation instructions in package.

ezH2O Installation Video:


Maintenance


It is recommended to routinely clean your Bottle Filling Station with a soft cloth and mild dishwashing soap to spray and wipe down the unit.  It is also recommended to clean the flexible fill mat.  Remove the four screws to wipe beneath and on top of the mat.

ezH2O Maintenance Video:


Filter Replacement


When filter status light turns to red, the filter needs to be changed.  Here are some detailed instructions.

ezH20 Filter Change Video:

Should you have a 115V/60Hz EZ style model with push bar activation, the Elkay EZWSRK Retrofit kit is designed to transform your existing drinking fountain into an efficient Elkay water bottle filling station.

We recommend retrofitting NON-CHILLED fountains that are less than 10 years old. CHILLED fountains should be less than 5 years old to be considered for a retrofit. Unsure of your fountain's age? We can assist you. Send an email to support@bottlefillingstations.com with the serial number of your current fountain, located at its base. Please ensure that the existing fountain(s) were installed according to specifications.

Product Benefits:

  • ADA compliant design.
  • The sanitary bottle filling is achieved through a hands-free sensor activation and a recessed spout, complemented by a 20-second automatic shut-off system.
  • Quick fill rate of 1.5 Gallons Per Minute.
  • Green Ticker tracks the number of plastic bottles saved from waste.
  • Chilled if installed on a refrigerated EZ fountain.

 

FAQ

Q: How long does it take to install this retrofit?  

A: It varies, but the typical Bottle Filling Station retrofit install takes 1-2 hours.

Q: Does the retrofit come with a chiller?

A: No. The retrofit will utilize the compressor from your existing fountain (if applicable).  

Q: How do I know if this is the most appropriate retrofit for my setup?

A: Please send the serial # of your existing fountain to support@bottlefillingstations.com. If you’re unable locate, please email us a picture of your existing fountain.  

Elkay EZWSRK

 

*ASSEMBLED IN THE UNITED STATES.  

Experience the benefits of the very popular Elkay EZWSRK Water Bottle Filling Station. Best Support, Fast Shipping, & Low Prices. CONTACT US NOW!

 

Elkay EZWSRK | Retrofit Bottle Filler Kit | Filterless, Stainless Steel, For use with EZ-style fountains - BottleFillingStations.com
Elkay

Elkay EZWSRK | Retrofit Bottle Filler Kit For use with EZ-style fountains | Filterless, Stainless Steel

$ 750.00

Should you have a 115V/60Hz EZ style model with push bar activation, the Elkay EZWSRK Retrofit kit is designed to transform your existing drinking fountain into an efficient Elkay water bottle filling station.

We recommend retrofitting NON-CHILLED fountains that are less than 10 years old. CHILLED fountains should be less than 5 years old to be considered for a retrofit. Unsure of your fountain's age? We can assist you. Send an email to support@bottlefillingstations.com with the serial number of your current fountain, located at its base. Please ensure that the existing fountain(s) were installed according to specifications.

Product Benefits:

 

FAQ

Q: How long does it take to install this retrofit?  

A: It varies, but the typical Bottle Filling Station retrofit install takes 1-2 hours.

Q: Does the retrofit come with a chiller?

A: No. The retrofit will utilize the compressor from your existing fountain (if applicable).  

Q: How do I know if this is the most appropriate retrofit for my setup?

A: Please send the serial # of your existing fountain to support@bottlefillingstations.com. If you’re unable locate, please email us a picture of your existing fountain.  

Elkay EZWSRK

 

*ASSEMBLED IN THE UNITED STATES.  

Experience the benefits of the very popular Elkay EZWSRK Water Bottle Filling Station. Best Support, Fast Shipping, & Low Prices. CONTACT US NOW!

 

View product
In Stock
Free Shipping