Installation
- All plumbing is to be installed according to state and local codes and regulations.
- Turn off water supply before beginning installation.
- Check battery compartment for proper polarity.
- Connect vacuum breaker to control stop outlet.
- Calibrate sensor range using included hex key.
- Test automatic flush cycle after installation.
Maintenance
- Replace batteries according to usage frequency (typically every 3-4 years).
- Clean sensor window periodically with non-abrasive cleaner.
- Inspect diaphragm and seals annually for wear or damage.
- Check for leaks at connections during routine facility maintenance.
- Verify sensor calibration remains optimal for the space.
- Reset unit if erratic operation occurs by removing and reinstalling batteries.