The Haws 1011HSA.8 is a recessed, chilled hydration station combining a sensor‑activated bottle filler with dual hi‑lo drinking fountains in one vandal‑resistant stainless steel unit. Designed for schools, offices, and public facilities, it provides versatile hydration access in a compact wall‑mounted design.
Key Installation Requirements:
- Recessed wall installation with in‑wall carrier support
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet with GFCI protection
- Drain connections required for both cooler basins and bottle filler
- Maintain clearance for servicing refrigeration and filter components
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit includes a 3,000‑gallon Electronic Lifecycle Control filter cartridge
- Always depressurize water line before servicing or replacing filter
- Provide adequate ventilation clearance around refrigeration louvers
- Outdoor installation not recommended — warranty may be voided
- Secure fountains firmly to wall structure to meet vandal‑resistant requirements
Basic Installation Overview:
- Install in‑wall carrier securely to support recessed unit weight
- Plumb water supply with service stop and union connection; flush line thoroughly
- Mount recessed bottle filler and fountain assembly into wall opening
- Connect drain lines from both coolers and bottle filler to building drain system
- Wire electrical supply to grounded outlet; verify refrigeration system powers on
- Pressurize system slowly and check for leaks
- Test sensor activation for bottle filler and bubbler stream height; adjust regulator if needed
- Install trim panels and finish plates
For complete specifications and installation guidelines, download the official 1011HSA.8 Spec Sheet and the Installation Manual.
Want to Order the Haws 1011HSA.8 Bottle Filler or Get a Custom Quote?
Shop Haws 1011HSA.8 Bottle Filler