The Halsey Taylor 55897C WaterSentry® VII Replacement Filter is NSF/ANSI 42 and 53 certified for the reduction of lead, chlorine, taste & odor, and particulate Class I. It is designed for use with select Halsey Taylor water coolers and drinking fountains.
Key Installation Requirements:
- Cold water line only (40–100°F operating temperature)
- Maximum inlet pressure: 105 psi (7.4 Kg/cm²)
- Minimum inlet pressure: 20 psi (1.4 Kg/cm²)
- Flow rate: 1.5 GPM (5.7 LPM)
- Allow minimum 13" clearance below filter head for cartridge changes
Important Notes Before Installing the 55897C:
- Do not connect to hot water line.
- Replace filter every 1,500 gallons or once per year, whichever comes first.
- Certified to NSF/ANSI 42 and 53 for chlorine, taste & odor, particulate Class I, and lead reduction.
- Always refer to the official Halsey Taylor 55897C Spec Sheet for detailed specifications and compliance information.
Basic Installation Overview:
- Mount filter head securely using bracket and screws supplied.
- Connect cold water supply valve to filter inlet via shut‑off valve and 3/8" O.D. tubing.
- Connect outlet tubing from filter to cooler or fountain inlet using 1/4" O.D. tubing.
- Insert filter cartridge into head and rotate clockwise until fully seated.
- Turn on water supply and flush approximately 1 gallon to purge air and carbon particles.
- Inspect all connections for leaks and correct as needed.
For complete step‑by‑step instructions, download the official Halsey Taylor 55897C Installation & Maintenance Guide
Want to Order the 55897C or Get a Custom Quote?
Shop now at BottleFillingStations.com