The Pentair Everpure EV943710 High Flow CSR Quad‑MC2 System delivers premium quality water for high‑volume fountain, coffee, and ice machine applications. It is designed for multiple equipment combinations, reducing chlorine taste & odor, particulates, and cysts while protecting against scale buildup.
Key Installation Requirements:
- Mount system vertically with cartridges hanging down
- Allow at least 2‑1/2" clearance below cartridges for replacement
- Use 3/4" water line connections for inlet and outlet
- Choose a mounting location capable of supporting full operating weight (58 lbs)
- Connect fountain equipment before SR‑X system; connect coffee brewer and ice machine after SR‑X feeder
- Flush cartridges for 5 minutes at full flow during installation
Important Notes Before Installing:
- Do not install on hot water lines — cold water supply only
- System must be installed in compliance with local plumbing codes
- Always depressurize water line before servicing or replacing cartridges
- Replace cartridges every 6 months or sooner if flow/pressure drops
- Ensure adequate clearance and support to avoid strain on fittings
- Certified to NSF/ANSI Standards 42 & 53 — use only genuine Everpure cartridges for compliance
Basic Installation Overview:
- Mount system securely to wall using appropriate fasteners
- Connect 3/4" FNPT inlet and outlet fittings
- Connect fountain, coffee, and ice machine lines as specified
- Install prefilter cartridge (EC210) and MC2 cartridges
- Install SS‑IMF cartridge in SR‑X feeder for scale inhibition
- Flush system for 5 minutes at full flow to purge air and carbon fines
- Check all connections for leaks before placing into service
For complete step‑by‑step instructions, download the official EV943710 Specification Sheet.
Want to Order the EV943710 or Get a Custom Quote?
Shop now at BottleFillingStations.com