The Elkay VRCTLR8WSK is a vandal‑resistant bi‑level bottle filling station with integrated refrigerated coolers. Built for high‑traffic public areas, it delivers chilled, ambient water with mechanical activation and heavy‑duty construction for durability.
Key Installation Requirements:
- Wall‑mounted installation with in‑wall carrier support
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet with GFCI protection
- Drain connections required for both cooler basins and bottle filler
- Maintain clearance for servicing refrigeration components
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is filterless — delivers chilled and ambient water only
- Always depressurize water line before servicing
- Provide adequate ventilation clearance around refrigeration louvers
- Outdoor installation requires winterization or protection in extreme climates
- Secure fountains firmly to wall structure to meet vandal‑resistant requirements
Basic Installation Overview:
- Install in‑wall carrier securely to support dual cooler and bottle filler weight
- Plumb water supply with service stop and union connection; flush line thoroughly
- Mount cooler and bottle filler assembly to carrier, ensuring tubing and wires are not pinched
- Connect drain lines from both coolers and bottle filler to building drain system
- Wire electrical supply to grounded outlet; verify refrigeration system powers on
- Pressurize system slowly and check for leaks
- Test mechanical push‑button activation and bubbler stream height; adjust regulator if needed
- Install bottom cover plates and finish trim
For complete specifications and installation guidelines, download the official VRCTLR8WSK Spec Sheet and the Installation & Maintenance Manual.
Want to Order the VRCTLR8WSK Bottle Filling Station or Get a Custom Quote?
Shop VRCTLR8WSK Bottle Filling Station