The Elkay LZWS‑ERPB8‑RF is a retrofit bottle filling station designed to upgrade existing Elkay EZ series coolers and fountains. Featuring filtered, refrigerated water delivery and touchless activation, it provides a modern hydration solution without replacing the entire unit.
Key Installation Requirements:
- Retrofit installation onto compatible Elkay EZ series coolers
- Cold water line connection (35–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet
- Drain connection required for condensate
- Clearance for filter replacement and servicing
- Follow ADA guidelines for installation height
Important Notes Before Installing:
- Do not connect to hot water lines
- Always depressurize water line before servicing or replacing filter
- Use only genuine Elkay filters to maintain certification and performance
- Ensure cooler is properly leveled before retrofit installation
- Secure retrofit kit firmly to prevent vibration or leaks
Basic Installation Overview:
- Shut off water supply and disconnect cooler from power
- Remove existing front panel and prepare cooler for retrofit
- Install retrofit bottle filler assembly onto cooler frame
- Connect cold water supply line to inlet; flush line thoroughly
- Install filter cartridge into housing and lock into place
- Connect drain line to building drain system
- Wire electrical supply to grounded outlet; verify refrigeration system powers on
- Test bottle filler activation and chilled water flow
- Reinstall cover panels and finish trim
For complete specifications and installation guidelines, download the official LZWS‑ERPB8‑RF Spec Sheet and the Installation Manual.
Want to Order the LZWS‑ERPB8‑RF Retrofit Bottle Filling Station or Get a Custom Quote?
Shop LZWS‑ERPB8‑RF Retrofit Bottle Filling Station