The Elkay LZSTLDDWSLK is a bi‑level bottle filling station with integrated filtered coolers. Designed for high‑traffic indoor environments, it delivers chilled, filtered water with hands‑free sensor activation and ADA‑compliant dual fountain access.
Key Installation Requirements:
- Wall‑mounted installation with in‑wall carrier support
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet with GFCI protection
- Drain connections required for both cooler basins and bottle filler
- Maintain clearance for filter replacement and servicing
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Always depressurize water line before servicing or replacing filter
- Ensure sensor lenses are unobstructed for accurate activation
- Use only genuine Elkay filters to maintain certification and performance
- Provide adequate ventilation clearance around louvers
- Secure unit firmly to wall structure to meet bi‑level and vandal‑resistant requirements
Basic Installation Overview:
- Install mounting frame securely to support dual cooler and bottle filler weight
- Plumb water supply with service stop and union connection; flush line thoroughly
- Install filter head and cartridge into bracket, connect tubing per routing diagram
- Hang main panel on frame, ensuring wires and tubing are not pinched
- Connect drain lines from both coolers and bottle filler to building drain system
- Wire electrical supply to grounded outlet; verify LCD bottle counter illuminates
- Test bottle filler sensor activation and bubbler stream height; adjust regulator if needed
- Install bottom cover plates and tighten back panel screws
For complete specifications and installation guidelines, download the official LZSTLDDWSLK Spec Sheet and the Installation & Maintenance Manual.
Want to Order the LZSTLDDWSLK Bottle Filling Station or Get a Custom Quote?
Shop LZSTLDDWSLK Bottle Filling Station