The Elkay LZS8WSSK Single Bottle Filling Station (Filtered) provides chilled, filtered water with touchless sensor activation. Designed for wall‑mounted installation, it combines convenience, ADA compliance, and advanced filtration in one unit.
Key Installation Requirements:
- Wall‑mounted installation with hanger bracket support
- Cold water line only (40–100°F operating temperature)
- Water supply line: 3/8" O.D. copper tube with shut‑off valve (not included)
- Drain connection: 1‑1/4" O.D. trap (not included)
- Electrical supply: 115V / 60Hz with dedicated GFCI circuit required
- Maintain 6" clearance from cabinet louvers to wall for ventilation
- Allow proper clearance for filter cartridge changes
Important Notes Before Installing:
- Do not connect to hot water line
- Stream height is factory set for 45–50 PSI; adjust if supply pressure varies
- Certified ADA compliant when installed at proper height
- Visual filter monitor provides LED status for replacement timing
- Always refer to the official LZS8WSSK Spec Sheet for detailed specifications
Basic Installation Overview:
- Remove hanger bracket from cooler and mount securely to wall using all bolt holes
- Hang cooler on bracket, ensuring proper engagement with slots on the back
- Connect water inlet line to shut‑off valve and 3/8" tubing
- Install 1‑1/4" trap to drain line and tighten securely
- Install bottle filler wall plate and gasket, route water line and power cord
- Attach bottle filler to wall plate tabs and secure top cover
- Install filter cartridge into filter head and rotate clockwise until seated
- Turn on water supply, flush system, and check for leaks
- Plug unit into grounded GFCI outlet and verify proper operation
For complete step‑by‑step instructions, download the official LZS8WSSK Installation & Maintenance Manual.
Want to Order the LZS8WSSK or Get a Custom Quote?
Shop now at BottleFillingStations.com