The Elkay LVRCTL8SC is a vandal‑resistant wall‑mount ADA cooler with bi‑level filtered bottle filling stations. Engineered for durability in high‑traffic environments, it delivers chilled, filtered water with hands‑free sensor activation and dual ADA‑compliant access points.
Key Installation Requirements:
- Wall‑mounted installation with in‑wall carrier support
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet with GFCI protection
- Drain connections required for both cooler basins and bottle fillers
- Maintain clearance for filter replacement and servicing
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Always depressurize water line before servicing or replacing filter
- Ensure sensor lenses are unobstructed for accurate activation
- Use only genuine Elkay filters to maintain certification and performance
- Provide adequate ventilation clearance around louvers
- Secure unit firmly to wall structure to meet vandal‑resistant requirements
Basic Installation Overview:
- Install in‑wall carrier securely to support cooler and bottle filler weight
- Plumb water supply with service stop and union connection; flush line thoroughly
- Install filter head and cartridge into bracket, connect tubing per routing diagram
- Mount cooler and bottle filler assembly to carrier, ensuring wires and tubing are not pinched
- Connect drain lines from both coolers and bottle fillers to building drain system
- Wire electrical supply to grounded outlet; verify LCD bottle counter illuminates
- Test bottle filler sensor activation and bubbler stream height; adjust regulator if needed
- Install bottom cover plates and tighten back panel screws
For complete specifications and installation guidelines, download the official LVRCTL8SC Spec Sheet and the Installation & Maintenance Manual.
Want to Order the LVRCTL8SC Bottle Filling Station or Get a Custom Quote?
Shop LVRCTL8SC Bottle Filling Station