Installation
- Turn off the water supply and power before starting.
- Cut the wall opening to the recommended size and make sure the cavity is deep enough for the unit.
- Slide the dispenser into the wall opening and secure it with screws to the wall studs.
- Connect the water line to the shut‑off valve and then to the dispenser inlet.
- If using the filter box, install it directly below the dispenser and connect the tubing.
- If using a remote filter or optional chiller, mount them nearby (within 15 feet) and connect with tubing.
- Connect the electrical wiring to a GFCI‑protected circuit as required by code.
- Turn the water back on, restore power, and test the dispenser for leaks and proper flow.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed plumber/electrician.
Maintenance
- Replace the water filter when the indicator shows it’s time or at least once a year.
- Check tubing and connections regularly for leaks.
- Wipe the exterior with a soft cloth and mild cleaner.
- If water flow slows down, check the filter and replace if needed.
- For service or repairs, consult the manual or a licensed technician.