The Elkay LBWD00WHC Liv Built‑In Filtered Water Dispenser provides ambient filtered water with touchless sensor activation. Designed for residential and light commercial use, it offers a sleek in‑wall installation with advanced filtration and ADA compliance.
Key Installation Requirements:
- Wall‑mounted installation with in‑wall carrier or support bracket
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet
- Maintain clearance for filter replacement and servicing
- Indoor installation only; not rated for outdoor use
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is non‑refrigerated; optional remote chiller can be added if chilled water is required
- Always depressurize water line before servicing or replacing filter
- Ensure proper ADA installation height for accessibility
- Use only genuine Elkay filters to maintain certification and performance
- Provide adequate clearance for servicing and avoid pinching or straining wires
Basic Installation Overview:
- Mount in‑wall carrier or bracket securely to wall
- Connect cold water supply line to inlet
- Connect drain line if applicable
- Wire electrical supply to grounded 115V outlet
- Install filter cartridge into filter head and rotate clockwise until seated
- Turn on water supply and flush system for 5 minutes
- Test sensor activation and Green Ticker™ display for proper operation
For complete specifications and installation guidelines, download the official LBWD00WHC Spec Sheet and the Installation Checklist.
Want to Order the LBWD00WHC Liv Built‑In Filtered Water Dispenser or Get a Custom Quote?
Shop now at BottleFillingStations.com