The Elkay EZWSM8K is an in‑wall, filterless bottle filling station designed to provide a space‑saving hydration solution in commercial environments. Featuring hands‑free sensor activation and a fully recessed design, it delivers convenient bottle filling while maintaining hallway clearance and a clean architectural appearance.
Key Installation Requirements:
- In‑wall installation with adequate structural framing support
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet with GFCI protection
- Wall cavity must meet recessed mounting requirements
- Drain connection required for proper operation
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is filterless and delivers ambient water only
- Always depressurize water line before servicing
- Verify wall cavity dimensions before beginning installation
- Ensure sensor activation area remains unobstructed
- Inspect all plumbing and electrical connections before placing unit into service
Basic Installation Overview:
- Prepare wall opening and install required framing support
- Secure the mounting frame within the wall cavity
- Connect the cold water supply line and flush plumbing thoroughly
- Install the bottle filling station assembly into the recessed frame
- Connect drain and electrical service connections
- Pressurize the water system and inspect for leaks
- Test sensor activation and water flow performance
- Install finish trim panels and complete final inspection
For complete specifications and installation guidelines, download the official EZWSM8K Spec Sheet and the Installation Manual.
Want to Order the EZWSM8K In‑Wall Bottle Filling Station or Get a Custom Quote?
Shop EZWSM8K In‑Wall Bottle Filling Station