The Elkay EZWS‑ERPB8‑RF is a retrofit, filterless bottle filling station designed to upgrade existing Elkay ERPB8 coolers. It provides hands‑free sensor activation, ADA compliance, and a quick way to add bottle filling functionality without replacing the entire unit.
Key Installation Requirements:
- Compatible with Elkay ERPB8 cooler models
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet with GFCI protection
- Drain connection required for cooler basin
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is filterless — delivers chilled water only
- Always depressurize water line before servicing
- Ensure sensor lenses are unobstructed for accurate activation
- Secure retrofit kit firmly to cooler structure to resist vandalism
Basic Installation Overview:
- Shut off water supply and depressurize system
- Remove cooler top panel and prepare mounting area
- Position retrofit bottle filler assembly onto ERPB8 cooler
- Connect water supply tubing and drain line per routing diagram
- Wire electrical supply to grounded outlet; verify LCD bottle counter illuminates
- Test bottle filler sensor activation and bubbler stream height; adjust regulator if needed
- Reinstall cover plates and tighten mounting screws
For complete specifications and installation guidelines, download the official EZWS‑ERPB8‑RF Spec Sheet and the Installation Manual.
Want to Order the EZWS‑ERPB8‑RF Retrofit Bottle Filling Station or Get a Custom Quote?
Shop EZWS‑ERPB8‑RF Retrofit Bottle Filling Station