The Elkay EDFP214C Soft Sides® Wall‑Mount Drinking Fountain provides non‑filtered, non‑refrigerated water service in a durable stainless steel design. Featuring the Flexi‑Guard® Safety Bubbler and ADA compliance, it is ideal for schools, offices, and public facilities.
Key Installation Requirements:
- Wall‑mounted installation with proper carrier support
- Cold water line only (40–100°F operating temperature)
- Supply line pressure: 20–105 PSI (regulator required if above 105 PSI)
- Drain connection required for fountain basin
- Maintain clearance for servicing and accessibility
- Follow ADA guidelines for installation height and reach ranges
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is non‑filtered; optional retrofit filtration kits are available separately
- Always depressurize water line before servicing
- Indoor installation only; protect from freezing conditions
- Ensure proper drainage to avoid water damage from spillage
- Use genuine Elkay accessories for compatibility and compliance
Basic Installation Overview:
- Mount in‑wall carrier securely to support fountain weight
- Position fountain and secure to wall structure
- Connect cold water supply line to inlet
- Connect drain line from basin to building drain system
- Pressurize system slowly and check for leaks
- Test bubbler stream height; adjust regulator if needed
- Install bottom cover plate and finish trim
For complete specifications and installation guidelines, download the official EDFP214C Spec Sheet and the Installation & Maintenance Manual.
Want to Order the EDFP214C Soft Sides® Drinking Fountain or Get a Custom Quote?
Shop EDFP214C Drinking Fountain