The Elkay 98466C Solenoid Valve & Regulator Assembly Kit is an OEM replacement part for Elkay EZ series and Halsey Taylor HTV coolers. It regulates water flow and ensures consistent dispensing performance.
Key Installation Requirements:
- Disconnect electrical power before servicing the unit
- Shut off water supply prior to installation
- Mount solenoid valve/regulator assembly securely in designated location
- Connect 24V wiring harness to solenoid valve
- Attach regulator assembly to water line using quick‑connect fittings
- Verify seals and gaskets are properly seated to prevent leaks
Important Notes Before Installing:
- Designed for Elkay EZ and Halsey Taylor HTV models only
- Professional installation recommended for service reliability
- Always depressurize system before disconnecting hoses
- California Proposition 65 warning: contains styrene, a chemical known to cause cancer/reproductive harm
Basic Installation Overview:
- Disconnect electrical power and shut off water supply
- Remove cooler front panel to access valve/regulator assembly
- Disconnect old solenoid valve/regulator assembly from wiring and water lines
- Install new assembly, securing with provided fittings and screws
- Reconnect wiring harness and water lines
- Restore water supply and electrical power
- Test cooler to confirm proper water flow and valve operation
For complete step‑by‑step instructions, refer to Elkay service manuals for EZ series and HTV coolers.
Want to Order the 98466C or Get a Custom Quote?
Shop now at BottleFillingStations.com