The Zurn Z6913-XL is a deck‑mounted AquaSense® sensor faucet designed for touchless handwashing in commercial restrooms. Using the installation requirements of the Z6913‑XL‑F configuration as a guide, this sensor‑activated faucet provides reliable operation, water conservation, and reduced cross‑contamination in healthcare, education, and public facilities.
Key Installation Requirements:
- Deck‑mounted installation through a single faucet mounting hole
- Cold and hot water supply connections required
- Compatible with hardwired or battery-powered sensor operation depending on configuration
- Supply pressure must comply with manufacturer specifications
- Allow access beneath the sink for control module and maintenance
- Install in accordance with local plumbing and electrical codes
Important Notes Before Installing:
- Always shut off water supplies before beginning installation
- Flush supply lines thoroughly before connecting the faucet
- Do not overtighten mounting hardware or plumbing connections
- Keep the sensor lens clean and unobstructed for reliable activation
- Verify proper placement of the control box and power components before final assembly
- Inspect all connections for leaks prior to placing the faucet into service
Basic Installation Overview:
- Prepare the sink deck and verify mounting hole dimensions
- Insert the faucet through the mounting hole and secure from below
- Install the control module and connect the sensor cable
- Connect hot and cold water supply lines to the mixing assembly
- Install the battery box or electrical connection as applicable
- Turn on the water supply and check all fittings for leaks
- Power the unit and verify sensor activation
- Test water flow and make any required adjustments
For complete specifications and installation guidelines, download the official Z6913-XL Spec Sheet and the Installation Manual.
Want to Order the Z6913-XL AquaSense® Sensor Faucet or Get a Custom Quote?
Shop Z6913-XL AquaSense® Sensor Faucet