Installation
- Turn off the water supply before starting.
- Secure the wall mounting plate and hanger bracket according to the rough‑in diagram.
- Mount the fountain body to the bracket and connect the drain and water inlet.
- Place the bottle filler on the fountain basin, feed the water line through the opening, and seat it on the gasket.
- Tighten the mounting screws on each side of the bottle filler and install the top cover.
- Connect the bottle filler water line inside the fountain to the tee at the water outlet.
- For TL models, connect the regulator tubing and filter cartridge as directed.
- Turn on the water supply and check all connections for leaks.
- Test the push button on the bottle filler to confirm proper dispensing.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed plumber.
Maintenance
- Inspect the unit regularly for leaks or loose fittings.
- Clean stainless steel and basin surfaces with mild soap and water; avoid abrasive cleaners.
- Replace the filter cartridge every 12 months or sooner if flow slows down.
- Check the aerator and nozzle periodically; replace with genuine Elkay kits if worn.
- For servicing, the bottle filler can be removed by loosening the side screws and lifting it off the fountain.
- For service or repairs, consult the manual or a licensed technician.