Installation
- Designed as the replacement cartridge for Oasis VersaFilter III systems in coolers and bottle fillers.
- Turn off water supply and relieve pressure by actuating bubbler or bottle filler before replacement.
- Disconnect power cord before servicing.
- Remove protective cap and insert cartridge into filter head; rotate 1/4 turn clockwise to lock.
- Flush filter for 1–2 minutes until water runs clear to remove air and carbon particles.
- If installation is difficult, contact a licensed plumber or authorized Oasis service technician.
Maintenance
- Replace cartridge every 12 months or after 4,750 gallons of use, whichever comes first.
- Inspect tubing and quick‑connect fittings periodically for leaks or wear.
- Clean sensor and basin areas with non‑abrasive cleaner to maintain performance.
- Use only genuine Oasis replacement cartridges (041145‑001) for certified contaminant reduction.
NOTICE
- Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection.
- Filter is certified to NSF/ANSI 42 & 53 for chlorine, taste & odor, particulate Class I, cyst, and lead reduction.