Installation
- Turn off the water supply before starting.
- Remove the old filter by twisting it off.
- Unpack the new filter and take off the protective cap.
- Insert the new filter into the head and twist until it locks in place.
- Turn the water supply back on and check for leaks.
- Run water for several minutes to clear air and carbon particles.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed plumber.
Maintenance
- Replace the filter once a year or sooner if water flow slows down.
- Check connections regularly to make sure there are no leaks.
- Only use with cold water; protect the filter from freezing temperatures.
- Wipe the outside with a soft cloth and mild cleaner to keep it clean.