Installation
The 2000HS is designed for recessed wall mounting and requires electrical, water, and drain connections. Installation should be completed by qualified professionals.
- Prepare the wall opening according to installation guidelines and ensure adequate cavity depth and support.
- Rough in electrical (GFCI-protected), water supply, and drain connections in the correct locations.
- Secure the unit frame into the wall and ensure it is level and properly supported.
Reassemble and mount the bottle filler components onto the frame. - Connect electrical wiring, water supply tubing, and drain line following standard practices.
- Install the filter, turn on the water supply, and check all connections for leaks.
Restore power, test the unit, and flush the system to remove air and prepare for use.
Maintenance
Routine maintenance is recommended to keep the unit operating efficiently.
- Clean stainless steel and plastic surfaces with mild soap and water; avoid harsh chemicals.
- Replace the filter regularly based on usage or performance indicators.
- Periodically inspect water connections, drain line, and overall system condition.
- Monitor filter status indicators for replacement timing.
- Maintain proper water pressure within recommended range for optimal performance.
- Flush the system after filter replacement to ensure proper operation.
Refer to the product manual for full installation drawings and troubleshooting details.