The Haws 1212S is a hi‑lo wall‑mounted water cooler and bottle filling station. Designed for indoor use, it combines dual ADA‑compliant drinking fountains with a sensor‑activated bottle filler, delivering chilled water in high‑traffic environments such as schools, offices, and public facilities.
Key Installation Requirements:
- Wall‑mounted installation with carrier support
- Cold water line only (40–100°F operating temperature)
- Electrical supply: 115V / 60Hz grounded outlet
- Drain connections required for both fountains and bottle filler
- Follow ADA guidelines for fountain and filler heights
Important Notes Before Installing:
- Do not connect to hot water lines
- Always depressurize water line before servicing
- Ensure sensor lenses are unobstructed for accurate activation
- Provide adequate ventilation clearance around louvers
- Secure unit firmly to wall structure to resist vandalism
Basic Installation Overview:
- Install in‑wall carrier securely to support dual fountain and bottle filler weight
- Plumb water supply with service stop and union connection; flush line thoroughly
- Mount cooler and bottle filler assembly to carrier, ensuring wires and tubing are not pinched
- Connect drain lines from fountains and bottle filler to building drain system
- Wire electrical supply to grounded outlet; verify bottle counter display illuminates
- Test bottle filler sensor activation and bubbler stream height; adjust regulator if needed
- Install cover plates and tighten back panel screws
Other Related Variants:
- 1211S: Single hi‑lo cooler with bottle filler
- 1210S: Standard cooler with bottle filler
For complete specifications and installation guidelines, download the official 1212S Spec Sheet and the Installation Manual.
Want to Order the Haws 1212S Hi‑Lo Cooler & Bottle Filler or Get a Custom Quote?
Shop Haws 1212S Hi‑Lo Cooler & Bottle Filler