The Haws 1011MS is a vandal‑resistant dual drinking fountain designed for durability in high‑traffic environments. Constructed of heavy‑gauge stainless steel with shielded bubblers, it provides safe, accessible hydration at two levels in compliance with ADA standards.
Key Installation Requirements:
- Wall‑mounted installation with in‑wall carrier support
- Cold water line only (40–100°F operating temperature)
- Supply line pressure: 30–90 PSI
- Drain connection required for both fountain basins
- Follow ADA guidelines for installation height and accessibility
Important Notes Before Installing:
- Do not connect to hot water lines
- Unit is non‑filtered and non‑refrigerated — delivers ambient water only
- Always depressurize water line before servicing
- Outdoor installation requires winterization or protection in extreme climates
- Ensure proper drainage to avoid water damage from spillage
- Secure fountains firmly to wall structure to resist vandalism
Basic Installation Overview:
- Install in‑wall carrier to support dual fountain weight
- Position fountain assembly and secure to wall structure
- Connect cold water supply line to inlet
- Connect drain lines from both basins to building drain system
- Pressurize system slowly and check for leaks
- Test bubbler stream height; adjust regulator if needed
- Install bottom cover plates and finish trim
For complete specifications and installation guidelines, download the official 1011MS Spec Sheet and the Installation & Maintenance Manual.
Want to Order the Haws 1011MS Dual Drinking Fountain or Get a Custom Quote?
Shop Haws 1011MS Drinking Fountain