Installation
- Mount dual filter head vertically under sink with cartridges hanging down; allow clearance for replacement.
- Connect cold water supply using shut‑off valve and quick‑connect fittings; use minimum tubing length.
- Attach outlet tubing to dedicated faucet or appliance connection.
- Insert both H‑1200 cartridges into filter head and lock into place.
- Turn on water supply and flush system for at least 5 minutes to purge air and carbon particles.
- For detailed steps, refer to the installation manual provided in the package or contact a licensed plumber.
Maintenance
- Replace both cartridges at the same time, annually or after 1,000 gallons of use.
- Inspect fittings and tubing periodically for leaks; reseat if necessary.
- Check flow rate; replace cartridges if water becomes slow or capacity is reached.
- Clean exterior surfaces with mild, non‑abrasive cleaner.
- For service or repairs, consult the manual or a licensed technician.